Re: Accelerator Sensor Malfunction
heres some info on a tsb available
Some 2001 and 2002 model year Prius vehicles may exhibit a Master, Hybrid and M.I.L.
warning light “ON” condition if an abnormally low engine power output was detected
during a steady cruise or while gradually accelerating. If Diagnostic Trouble Code (DTC)
P1120 is present with one or more information codes (104–114) in the HV ECU, use the
following procedure to replace the accelerator pedal assembly.
2001 – 2002 model year Prius vehicles produced BEFORE the Production Change
Effective VIN shown below.
MODEL COMPONENT PRODUCTION CHANGE EFFECTIVE VIN
Prius Pedal Assembly, Accelerator JT2BK18U*20055918
PREVIOUS PART NUMBER CURRENT PART NUMBER PART NAME QTY
78010–47030 Same Pedal Assembly, Accelerator 1
Refer to the SFI section in the applicable Prius Repair Manual, Volume 2 for instructions
to replace the accelerator pedal assembly.
TOOLS & MATERIALS QUANTITY
Standard Metric Socket Set and Hand Tools As Required
OP CODE DESCRIPTION TIME OFP T1 T2
552011 R & R Accelerator Pedal Assembly 0.2 78010–47030 04 99
Applicable Warranty*:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in
effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle’s
in-service date.
* Warranty application is limited to correction of a problem based upon a customer’s specific complaint.
ENGINE
Introduction
|