VSS speed sensor wire in 03 Rav4 - Toyota Tundra Forums : Tundra Solutions Forum

peoria · #1 (**permalink**) 06-26-2008, 10:40 AM

Anybody know the wire location for VSS on 2003 Rav4 I need to hookup the GPS wire to the VSS. Any close location to the dash... Appreciated

Tundradrenalin · #2 (**permalink**) 06-26-2008, 10:33 PM

Quote:

Originally Posted by peoria

Anybody know the wire location for VSS on 2003 Rav4 I need to hookup the GPS wire to the VSS. Any close location to the dash... Appreciated

This is from a 2004 RAV4.

peoria · #3 (**permalink**) 06-27-2008, 08:50 AM

Thanks you so much
Can you provide me a little more details

How do I get to this pin ? combination meter ?

What is difference between pin 4 and pin 6 ?

mustang67408 · #4 (**permalink**) 06-27-2008, 01:49 PM

Please do not use the above picture it is incorrect for a 2003.

Use connector C13 on the back of the combination meter. It is PIN 1 a white wire. (see attachments)

The 2004 pictured above would use pin 4, PIN 6 is the ground and would provide no signal.

Tundradrenalin · #5 (**permalink**) 06-27-2008, 03:43 PM

Ahhh thanks for the reinforcements Mustang. I was on the right track though, right?

peoria, does this help? let us know if you need more info...

mustang67408 · #6 (**permalink**) 06-27-2008, 04:23 PM

absolutly on the right track

peoria · #7 (**permalink**) 06-27-2008, 04:56 PM

Thanks mustang I will see these attachments in details and route my wire to this white wire PIN1 to my GPS input and see what happen

thanks again u all.

peoria · #8 (**permalink**) 07-01-2008, 10:36 AM

how do I get to the combination meter connections? Any procedure to follow ? Thanks

mustang67408 · #9 (**permalink**) 07-01-2008, 10:43 AM

REMOVE CLUSTER FINISH PANEL
Using a screwdriver, remove the cluster finish panel.
REMOVE COMBINATION METER
(a) Push out the connector by loosening the bolt.
NOTICE:
Operation is completed when the bolt failed to catch.
(b) Check that the red−colored indicator is pulled back behind.
(c) Remove the 4 screws.

peoria · #10 (**permalink**) 07-01-2008, 12:03 PM

Thanks Mustang
So the VSS wire is pin1 on C13 connector (white) ?
what will the reverse wire IS there any reverse wire in those connectors ?
Do you have wire color description for these conectors?
Thanks

mustang67408 · #11 (**permalink**) 07-01-2008, 12:06 PM

Quote:

Originally Posted by peoria

Thanks Mustang
So the VSS wire is pin1 on C13 connector (white) ? YES
what will the reverse wire IS there any reverse wire in those connectors ?
Do you have wire color description for these conectors?
Thanks

Reverse wire is CONNECTOR C14 pin 9 (red wire with a black stripe)

peoria · #12 (**permalink**) 07-01-2008, 12:49 PM

wow mustang

you are fast and great

Thanks

peoria · #13 (**permalink**) 07-01-2008, 12:52 PM

can you send me again this JPEG Its so small I can not see through it

Thanks mustang

peoria · #14 (**permalink**) 07-01-2008, 01:55 PM

I got it Thanks