Re: help please
I haven't changed it but if it's like all the other cars I own, you just need a small flathead screwdriver that has the tip wrapped in electrical tape (to prevent scratching). Then just locate the tabs (usually obvious or the lens itself will say "open here"). After that, remove the bulb.
Also, some words of caution from the manual:
REMOVAL OF MAP LIGHT
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent airbag and seat belt pretensioner activation.
__________________
My Truck: 2005 Tundra, 2UZFE. 4WD. AccessCab. Spectra Blue Mica (8M6). TRD. AT. CC. CK. DZ. FE. AW. LD. OF. TO. VP. Suspension & Tires: 285/75-16 BFG T/A'ko, Fabtech Coils, Toytec Diff Drop, 1.25" Spidertrax [front], 1.5" Goeske Wheel Adapters [rear] Handling: TC Poly Steering Rack Bushings, Downey HD End Links, Wheeler's Anti-Sway Kit, Hellwig 7700 Swaybar, Timbren Rear SES Electrical: URD MAF Sensor Calibrator, Superlift Truspeed Speed Sensor Re-Calibrator, ScangaugeII, Full VLED's Conversion Stereo: Alpine CDA-9886, Alpine & Phoenix Gold amps, Q-Logic box w/RF subs, eDead Sound Deadener Cosmetic: Line-X Bedliner & Mirror covers, Custom N-Fab Steps, Rear Diff Breather Extension, F103N Fumoto Oil Drain Valve, Debadged (partially), Bell Truck Trunk, Access Vanish Tonneau
Get TundraSolutions shirts and other gear, click HERE | Want to advertise on TundraSolutions.com? click HERE
Even if you are virtually stupid, don't look stupid online. Download a FREE spellcheck −−→ click HERE
Be an organ & tissue donor, register at DonateLife
|
Linear Mode
