Re: 06 Scion xB-Radio Servicing
Are you installing the factory receiver? If so, there's quite a bit that needs done, including removing the passenger seat. You will need to pull the radio, but that's pretty easy. Just pull the knobs off your AC controls (they just pop off with a little force) and unscrew the two phillips head screws underneath them. From there, you just give a good tug on the entire faceplate the covers the center of your dash. Then, you will see the brackets that hold the radio. It is held by 4 phillips head screws. Once those are out, the entire unit lifts out and you'll be able to access the plugs on the back of the unit.
__________________
I've moved dealers again. Hopefully this is the last one. I'm at Rosner Toyota in Fredericksburg VA. Call 540-898-7900 and ask for Steve Clifford... they will not know who "Cliffy" is.
|