hi, have a '07 5.7 tundra and a '10 sequoia 5.7L 4x4 ...
my tundra is 7 qts with filter but am I right that on sequoia, 5.7L with 4x4, it's 8 qts oil?
do they use the same filter cartridge?
i'm at 2000 miles with the new seq. and was gonna change the oil but it's still absolutely CLEAN... light honey colored..... i know there's some metal flakes on the filter element probably but... almost thinking of just going to 4-5K and changing....
i didnt change mine till 5K, dealer told me that, i figured the motor could handle it, im about to do my first oil change myself at 15K, so i'd be interested to know how many quarts to buy.
well, my dilemma too...i have a 5.7L tundra that takes 7qts with filter...
the seq with 5.7L 4x4 version, seems to note 8qts with filter....i just wanna get a confirmation on the oil cap of the sequoia...
i'm at 2k and the oil is CLEAN so, i'm gonna goto 5000 miles for 1st change too maybe and then do every 5K as usual... M1 5-30W is what i use...
any more help/input on the capacity guys btwn the two 5.7L motors ???
My 08 4x4 5.7 just hit 2000 miles and I went ahead and got the oil & filter changed. I have always tried to do my first oil change under 3000 miles. Old school I guess. I had them leave the maintenance reset unchanged so I can just go ahead with the 5000 mile service. That will give me the peace of mind knowing I changed out the original oil. I just get nervous thinking that there might be some kind of "leftovers" from the manufacturing process. I'm sure Toyota knows how to maintain their engines, but like I said, I am old school. The dealer had tossed in the Toyota prepaid maintenance program as a purchase incentive and it pays for service at 5000 mile intervals until 65K but I paid this first one myself. I am looking at the receipt, ($49), now and they don't list a quantity of oil. They just give a cost, $27.89 for the oil as part of a "V8 5.7L LOF Kit". I thought I had read that it was like 7.6 qts with filter but I'm not sure about actual quantity. I checked my oil and it is full. They did also check all fluid levels and all too. very worth it for my peace of mind. Not much help I know.
why don't you look in the owners manual??? the capacity of the 5.7 in the tundra may be different compared to the sequoia. they could have different sized oil pans.
you could always start with 7 then check the dipstick, if it is low add more...
seems pretty straight forward to me
I have both an 07 Tundra and an 08 Sequoia. They both hold the same 7 1/2 qts of oil. First change at 1000 mi. then every 5k after!
__________________ Black 2007 D/C Limited 4x4, seems to have ALL the options, Flowmaster Dual Delta 40's, K&N drop in filter, Rhino Liner', 3" frt 1" rear Daystar leveling kit, BFG Radial All Terrain TA's 305x65x18, Moto Metal M0951's in Chrome 18x9. Fully DeBadged , Stebel horn, C/W grill, TRD Swaybar, Wet O's, Craven Speed Stubby Antenna, 10,000 lb winch, H11 bulbs, Production date 8/07
"CBTMA Member" all that is remaining is:
Black Mod Headlights 1997 Chevy Tahoe Sport 4x4 2008 Sequoia Ltd. Slate Metallic (purchased on 3/28/09)
"Some people spend an entire lifetime wondering if they made a difference. The MARINES don't have that problem." President Ronald Reagan 1985
well, nice to get some inputs...thanks...
it looks like the 2007 5.7 tundra does take 7qts,with filter, as I've noted but the 2010 sequoia indeed takes an additional quart....i.e. 7.9qts with filter...
that's what my manual says but i just wanted to be sure....yeah, putting 7qts first and titrating up is safe....
all well....
thanks all
5.7L tundra and sequoias do have Different capacity i think....
oil capacity vs. 5.7 L tundra
Linear Mode
