Pictures Thread LS460 HID retrofit

[bewshy]

Very nice!!! I love the way they look on the Sequoia.

The vertical aim looks a little off. The drivers side could go higher or the passenger side lower.

[Marky_Mark]

Originally Posted by bewshy

Very nice!!! I love the way they look on the Sequoia.

The vertical aim looks a little off. The drivers side could go higher or the passenger side lower.

I believe that is the way it is on all cars even from the factory..You just do not notice it unless you have projectors. You aim the passenger side higher vertically than driver as for it to project further down the road. I could be wrong, but have read it many times.

[NoKz]

So badass! Congrats!

[TRD-Ferguson]

Very, very nice. Would you mind PMing me (ballpark of course, if you don't want to discuss it), about how much this ran? I had been talking to Cesar about doing something similar for myself a while back and I'm curious if it's higher now that he's seen actually done a set of these lights. I'm providing the bulbs, ballasts, and wiring myself, so that should save me a bit, really the cost of the projectors and the labor is what I'm interested in.

Thanks,
Jack

[JMSinMD]

Total was about $1200, parts about $550, labor (without color matched black headlight mod/install) was about $425. Parts were from Matt @ The Retrofit Source, btw.

[JMSinMD]

I took advantage of some night fog and took a few more pics. It cuts right through the fog better than my fog lights

[Theohiomike]

Thats freeking sweeeeeeeet.