Wheel Opinion: OZ Versilia

[JMSinMD]

I'm a long way a way from possibly getting wheels. I'm not looking for an offroad look, more of a VIP look. Going on a black Sequoia Platinum, in the mean time I'm looking around to see what catches my eye. Vote and let me know. Looking at the Matte Black/Diamond Cut Versilia - OZ - Inside the excellence since 1971

[ThirdHorseman]

I like them! But I don't know if they will go with your 2 color rule - I would look for a clean wheel with a black center and polished or chrome lip.

[JMSinMD]

I like them! But I don't know if they will go with your 2 color rule - I would look for a clean wheel with a black center and polished or chrome lip.

Why not, black/chrome?

[ThirdHorseman]

In the picture the wheels look like anthracite and black?

[Marky_Mark]

Awesome wheel, but I do not see a fitment for your Sequoia in that wheel.

[JMSinMD]

Awesome wheel, but I do not see a fitment for your Sequoia in that wheel.

What are the exact specs I should be looking for without having to make ANY adjustments from factory? Plenty of off road looking wheels, black wheels, cheap chrome looking wheels but as I told Third, the overall 'theme' for my truck would be a VIP interpretation. I wouldn't mind chrome/black or just chrome (but not busy looking with fake rivets, etc, etc). I wonder how it would look with different size lips, obviously wider in back, but then I can't rotate my tires.

[Marky_Mark]

5x150mm is the bolt pattern for yours too I believe..That is the main thing.

[JMSinMD]

I'll keep searching, there's not many wheels out there that I'm wowed by. Chip Foose has some nice wheels, but I still am waiting to find the 'perfect' wheel.

[Marky_Mark]

^^Foose wheels are awesome..And places like that will custom drill some of their wheels to fit your vehicle. Cost ya more though, but you will have something that not many others will have unless they do the same. That is my plans here before long as I am going to run a 10 or 11" in the rear.

[ThirdHorseman]

Finding wheels for this vehicle has been the most difficult mod I've ever done... I was soooooo close to just going forged to get exactly what we wanted, but couldn't bring myself to spend that much money on wheels. I finally found a set that will look good (but I don't mind fake rivets so it was still easier for me than it will be for you).

Here are the specs you need:

- 5x150 lug pattern

- mid to high offset (offset in the 30s will pull the wheel into the wheel well, 20s will be sticking out a bit)

- 110 mm center bore minimum (probably 110.5)

Make sure to CALL the place before ordering...I ran into so many websites that incorrectly listed wheels for our lug pattern since their systems list blanks for all lug patterns even though not all blank wheels can be drilled into 5x150. I really liked the ones below but found out they cannot be drilled.

Lastly, don't take no for an answer. The same place that listed the wheel below told me that the wheel I ultimately purchased did not come in my lug pattern, but they were wrong.

[ThirdHorseman]

Check out this website - they have done TONS of Sequoias: Wheel Specialists, Inc.

The only reason I didn't go with them is because the wheels I ordered are on national backorder in both black and chrome, but I managed to find one set on the shelves here: Chrome Wheels, Chrome Rims - Street Dreams

Both places are very knowledgeable about our bolt patterns, which is very rare to find.

Here is a set I thought would look awesome on your Sequoia. They are about $500 per wheel in 22 inch diameter. I really like them but I wanted to go with a 5 or 6 spoke since I'm not doing 24s.

[Marky_Mark]

Stock is 60mm...I have 30mm and it pushes it out to the fender welll..Right rear actually sticks out for some reason. Toyota designed it this way for whatever reason. And as mentioned 20mm will for sure push it out the fenderwells.

[Marky_Mark]

Check out this website - they have done TONS of Sequoias: Wheel Specialists, Inc.

The only reason I didn't go with them is because the wheels I ordered are on national backorder in both black and chrome, but I managed to find one set on the shelves here: Chrome Wheels, Chrome Rims - Street Dreams

Both places are very knowledgeable about our bolt patterns, which is very rare to find.

Here is a set I thought would look awesome on your Sequoia. They are about $500 per wheel in 22 inch diameter. I really like them but I wanted to go with a 5 or 6 spoke since I'm not doing 24s.

^^That wheel is hotttt!

[JMSinMD]

I finally found a set that will look good (but I don't mind fake rivets so it was still easier for me than it will be for you).

That's an acceptable amount of 'fake rivets' and not too busy looking.

[ThirdHorseman]

I agree Mark, they are sick! I went with the Nitto Terra Grapplers so I thought those would look weird with the elegant spokes of the Lexani.