2001 Sieena Mirror Replacement - Toyota Tundra Forums : Tundra Solutions Forum

01_Sienna · #1 (**permalink**) 08-31-2007, 08:24 PM

Hi:

Does anyone have info (pictures/repair manual pages) on how to replace the drivers side mirror on a 2001 Sienna XLE? Any help is appreciated.

NATEDAWG3256 · #2 (**permalink**) 08-31-2007, 08:47 PM

I don't have a manual, but u should just remove the trim piece thats on the inside behind the mirror, and there are typically 3 or four nuts or screws to remove and it comes off, you may have to remove the door panel to get to the pig tail if its a power mirror if its not behind the trim piece

01_Sienna · #3 (**permalink**) 08-31-2007, 09:23 PM

There are 3 screws on door. I need remove the door panel to get to the pig tail for the power mirror. I am looking for some instructions on how to remove the door panel. I know there are 3 screws on the door panel plus trim piece around door release. But, do I have to remove switch panel for door locks? or can I access the harness for the switches and remove from harness once door panel is off the door?

NATEDAWG3256 · #4 (**permalink**) 09-01-2007, 01:46 PM

I just unhooked the pigtail, going to the windows and locks once the panel was removed.

cruby · #5 (**permalink**) 09-16-2007, 05:22 PM

Here's a site that helped me when I replaced mine.
Instruction to replace mirror - SiennaClub.org Forums