2004 Sienna front bumper removal

[tom325xi]

I am going to replace my 2004 Sienna front bumper cover.
I could not find repair manual in Chilton or Haynes or pictures for it.
I never replace one before but here are the steps I plan to do:
1. Disconnect battery positive connector
2. Remove head lights and fog lights
3. Remove front tires and let the van sits on safety stands
4. Remove tire well covers
5. Remove the bumper cover

Sounds very simple huh... well that's all I can think of for now.
Let me know if you have any suggestion or want to know my result.
This is my first post... so wish me luck.

[BullPar]

I need to remove my bumper on my 05 sienna so if anybody have any pics what would be awsome.

[spender]

OP, with all due respect, I think your steps are all wrong, you don't need to remove headlights, etc. to get the bumper cover off.

Please take a look at the attached, but note that some people have problems removing the end clips - be warned, you can ruin your bumper if you do this wrong...

[tom325xi]

Yup, It does not require to remove the headlights and tire-well cover.
And yes, it was not visible enough to remove the end clips without breaking something. That's why I could not remove the bumper cover.
It would save a lot of time (and trouble) if I view the picture first.

As the picture was mention about the protective tape, may be the end clips need to pry off the fender (beware the potential of breaking it).
It would be great if we have a picture of the end clip.

Anyway, if the bumper cover snapped off the black grill due to somebody backed to it, then just snap it back by pushing the cover in with holding the black grill study. No need to jump into the pool.
The bumper cover is attach to the car via screws clips in the picture and the end clips (not shown in picture).

Thank you... SPENDER