I need a favor from someone with a 6 inch procomp lift with 35s. I need measurements in inches of Cab height, rear and front bumpers ground to bottom of bumper and wheel well height from ground to bottom of fender and top of tire to bottom of fender. Please just trying to figure on heights and clearance for a few things....especially Taco Bell driv thru :lol: kidding but thanks in advance.

stock height of our trucks is 6'4" and just add about 7" to that and it should be pretty close to cab height. no bulletproof lift?

No im going pro comp with icons and custom deaver leafs with icon UCAs...Bulletproof is to expensive for what it is...and maintaining would be too with 38's and what not.

I'll try to make it out within the hour to get the measurement of my truck for you.

I'll try to make it out within the hour to get the measurement of my truck for you.I APPRECIATE IT BRO...and yours is the best cause im going the exact route you are with the exception of the rear

I am 34, 24, 36!! :D

Add 6" (your lift) plus about 2" for the tire.

I agree with Gutz only 38, 24, 34

So I went to my truck to get some measurements and noticed some idiot hit my rear bumper. It has a small dent and I hope that who ever did it really f'd their car up. Hmmm... since I have the Allstate "accident forgiveness" I wonder if I can get the fab fours from them. :D

Anyway, I was only able to get the overall height for now. From the floor to the top of the 3rd break light it's 82.5". I'll get you the other measurements later... I need to write down all your requests. Haha j/k

So I went to my truck to get some measurements and noticed some idiot hit my rear bumper. It has a small dent and I hope that who ever did it really f'd their car up. Hmmm... since I have the Allstate "accident forgiveness" I wonder if I can get the fab fours from them. :D

Anyway, I was only able to get the overall height for now. From the floor to the top of the 3rd break light it's 82.5". I'll get you the other measurements later... I need to write down all your requests. Haha j/k

That's 6'10.5" and I was pretty close with my estimate of 6'11"

That's 6'10.5" and I was pretty close with my estimate of 6'11"Yes you were....and i saw you on H3 on saturday about 3:30 or going towards town!!!

Yes you were....and i saw you on H3 on saturday about 3:30 or going towards town!!!

that was right before the guy jumped a few hundred feet to his death on the other side of the freeway.

that was right before the guy jumped a few hundred feet to his death on the other side of the freeway.WHAT!!!! thats crazy

Krew, sorry it took me forever to get the measurements. Please note, the ground isn't completely leveled at the parking area. Might have some high / low spots... but the measurements seemed pretty consistant. Anyway, Here you go:

Cab Height - 82.5"
Rear Bumper (lowest part of the bumper, above the hitch) - 25"
Front Bumper (lowest part of the plastic grey valance) - 22.5"
LF Wheel Well
Ground / Fender: 45.5"
Tire / Fender: 11.75"
RF Wheel Well
Ground / Fender: 45.25"
Tire / Fender: 11.25"
LR Wheel Well
Ground / Fender: 45.5"
Tire / Fender: 11.5"
RR Wheel Well
Ground / Fender: 45.75"
Tire / Fender: 11.625" (11 5/8")

Hope this helps.... :tu:

Krew, sorry it took me forever to get the measurements. Please note, the ground isn't completely leveled at the parking area. Might have some high / low spots... but the measurements seemed pretty consistant. Anyway, Here you go:

Cab Height - 82.5"
Rear Bumper (lowest part of the bumper, above the hitch) - 25"
Front Bumper (lowest part of the plastic grey valance) - 22.5"
LF Wheel Well
Ground / Fender: 45.5"
Tire / Fender: 11.75"
RF Wheel Well
Ground / Fender: 45.25"
Tire / Fender: 11.25"
LR Wheel Well
Ground / Fender: 45.5"
Tire / Fender: 11.5"
RR Wheel Well
Ground / Fender: 45.75"
Tire / Fender: 11.625" (11 5/8")

Hope this helps.... :tu:I APPRECIATE BRO...how far do your wheels stick out from your fender...cause it looks like a lot maybe a real negative offset...:beatsme:

No prob. My wheels have a -11 offset. My guesstimate is that it sticks out about 2.75". When I put the fender flares on, it's almost flush... still sticks out a little farther.