Hello all, every pep boys in my area is out of that part 19-430 and it can't even be special ordered. How big/long are those bushings, and where else would sell a reputable replacement.

Hello all, every pep boys in my area is out of that part 19-430 and it can't even be special ordered. How big/long are those bushings, and where else would sell a reputable replacement.

you can use 1/4" or thicker nylon spacers from your local hardware store

I got the longer bolts from Home Depot and used large nuts as spacers. It works great and who said the spacers had to be soft anyway?

You could also use a wood block (round or square with hole drilled in the middle), pvc pipe cut to lenght. I used the pvc pipe from Home Depot with washers and kicked it out 1 1/2 inch.

Good Luck on your decision!

I like that idea of using PCV.

I like that idea of using PCV.

You can use any 11/2" End Link Bushings, Shock Absorber Bushings, Polyurethane Sway Bar Bushings or Suspension Bushings provided they can accommodate the 8mm bolt. At Pep Boys look for Energy Suspension end link bushings.

thanks for all the suggestions.... just ended up using 1" rubber stoppers from lowes and put an 8mm drill bit through the center... total cost of $3