So my new wheels came in today (18" Moto Metals). I have them wrapped in a 285/65/18 and my 05 Tundra (http://www.tundrasolutions.com/forums/#) DC has a 3/1 ReadyLift kit. I was told to by 2 different places to get the +18 offset. When the wheels and tires got put on today I found out I have serious rubbing issues with the tire on the control arm. Even when the tires are straight ahead there is almost no airspace between the tire and control arm. What now? PLEASE HELP!!!!

So my new wheels came in today (18" Moto Metals). I have them wrapped in a 285/65/18 and my 05 Tundra (http://www.tundrasolutions.com/forums/#) DC has a 3/1 ReadyLift kit. I was told to by 2 different places to get the +18 offset. When the wheels and tires got put on today I found out I have serious rubbing issues with the tire on the control arm. Even when the tires are straight ahead there is almost no airspace between the tire and control arm. What now? PLEASE HELP!!!!

Edit, For an 05 Tundra, A lower offset will help push the wheel out more and give you some more clearance at your control arms.

You need a wheel closer to a +-0 or even a -12

Thanks a lot 06DC. You are one of the few to offer help. I should have my XD Hoss with -12 offset put on by Monday.