I own the stealthbox for my 2006 tundra DC and it sounds great but looking for something with a little more bass. I found a box that fits between the back bench and the center console that houses a 10" sub. The stealthbox also has a 10" sub.

So my question is what amplifier do I need for two 10" subs? The subs are the same, here are the specifications:

JL Audio 10W3v3-2: 10-inch (250 mm) Subwoofer Driver, 2 Ω
500W RMS

Any help/suggestions would greatly be appreciated. Thanks.

kicker ZX1000.1 amp. 1000 watts mono at 2 ohms. so i believe that would 500 watts to each sub. should be plenty for both.

...or the JL Audio JX1000/1D for a bit less $ than the kicker. I have the JX 500 for one 10" JL sub and no complaints!

I own the stealthbox for my 2006 tundra DC and it sounds great but looking for something with a little more bass. I found a box that fits between the back bench and the center console that houses a 10" sub. The stealthbox also has a 10" sub.

So my question is what amplifier do I need for two 10" subs? The subs are the same, here are the specifications:

JL Audio 10W3v3-2: 10-inch (250 mm) Subwoofer Driver, 2 Ω
500W RMS

Any help/suggestions would greatly be appreciated. Thanks.



Pictures of your setup...

Look for a quality 1 ohm stable mono amp that can deliver 800-1000 Watts rms at 13.8 volts (or less).

Sent from my Galaxy Nexus using AutoGuide.com App