Buy (6) 2"hose clamps from a hardware store, the kind that adjust with the screw.

For the outer clamps, fasten two of them together end to end with the screw adjusters diametrically opposite each other to balance it when it rotates. Remove the stock clamp and replace with the hose clamps. For the inner clamps use one hose clamp

Cut off any excess. Clean any grease that has leaked.

Courtesy of Hovisimo, Caligator88, arkie6, TMS2U and many others

is this boot is the one touching the transmission? or is it the one closer to the brake/hub assembly? been reading over and over and is lost...