Hi all, I have a 92 toyota truck that I replaced the timing chain on. After I got done and tried to start it up it fired right up and then died. Sounded really good. Thinking that it was just a matter of adjustment of timing I tried another adjustment. Fired but ran really rough and died and since then I am able to get it to try and fire every once in a long shot with nothing. Ive set at tdc and reset my dist. Went through the whol shebang about 100 times. Now it wont fire at all and its starting to get on my last nerve. Ive checked spark, its getting fuel and no matter what i do with the dist. or timing nothing seems to be working.

You put the hose back on the throttle body, right?
There is a ground wire in that area near the alternator.
Timing is 5 BTDC with the diagnosis connector grounded.

check over at YotaTech (http://www.yotatech.com)