You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Suspension & AxleTechnical discussions regarding alignment, stock and modified suspensions, lift kits, axles, hub conversions, gearing and steering.
This is a discussion thread titled "control arm knock-outs to align gm truck", within the Suspension & Axle forum, part of the Technical & Vehicle Assistance Forums category.
Hi, I know this is a Toyota fourm, but I thought I might have some luck with this question here. Does anyone know if there are knock-outs on a 2001 GMC Yukon XL 2500 2wd? I have read that everything after 1999 does not have the knockouts that need to be removed, but was told by what I thought was a very reputable shop that the knockouts need to be removed for the alignment at a cost of $169 not including the alignment.
no, it has never been aligned. haven't really had the need to. the shocks haven't been replaced either, I have those on order, and I think that will help with part of the problem.
control arm knock-outs to align gm truck
haven't really had the need to. the shocks haven't been replaced either, I have those on order, and I think that will help with part of the problem.
Linear Mode
