Camburg's new Trail Series Suspension System!!! - Toyota Tundra Forums : Tundra Solutions Forum

jzaiden · #1 (**permalink**) 07-03-2009, 11:53 AM

$895.00 Full Kit Parts
Includes upper arms and front and rear shocks
$450.00 Labor

The all new Trail Series suspension system is the best economical way to add performance to your suspension. This system is designed with a new Long-Travel Bilstein 5100 series shock with multiple snap ring groove locations to hold the lower spring seat. This will allow you to adjust your ride height from 0-3" of lift and not have coil bind. These new shocks come with custom valving developed with hours of test time in the California, Nevada, and Mexico off-road terrain. This new coilover off-road system comes complete with Ball joint upper control arms and new 5100 series long travel rear shocks. These all new BILSTEIN 5100 series Long-travel front and rear shocks are only available exclusively through Camburg Engineering inc. or Distributors of Camburg suspension. For the money no other suspension system will come close on or off-road to the performance of the all new Camburg Trail Series suspension system.

elkvalley · #2 (**permalink**) 07-07-2009, 08:49 PM

Where do I purchase your trail series 3.0, and do you ship to canada?

jzaiden · #3 (**permalink**) 07-09-2009, 06:15 PM

You can buy from us Camburg Engineering Inc - liftkits - shocks - hella - bilstein - offroad or call us 714 848-8880

54warrior · #4 (**permalink**) 07-23-2009, 08:58 AM

Looks like nice stuff. A very reasonable price too IMO.

Quentin18 · #5 (**permalink**) 08-01-2009, 02:56 PM

Is it for the new tundras only do do they have them for the first gen tundras?

gkatmar · #6 (**permalink**) 08-08-2009, 11:15 AM

Has anyone installed this setup?

gkatmar · #7 (**permalink**) 08-08-2009, 11:15 AM

I already have the Bilstein 5100's, so would I just need the control arms and rear shocks?

jon745382 · #8 (**permalink**) 08-20-2009, 12:28 AM

what is the largest tires i could run and what should the back spacing be on the rims

motoxscott · #9 (**permalink**) 08-20-2009, 03:14 PM

Quote:

what is the largest tires i could run and what should the back spacing be on the rims

33" tires is what most people run on these trucks with that amount of lift.

6.50" backspacing is the most you want to go. Anymore than that and it pulls the wheel & tire too far inward.

Quote:

I already have the Bilstein 5100's, so would I just need the control arms and rear shocks?

Correct you can add the upper arms with your Bilstein 5100's. You wont see the wheel travel increase since your shock version is the limiting factor but you will get the corrected geometry and stronger part.

- Scott @ Camburg