I just got off the phone with the guy thats actually designing this 1" body lift. He informs me that he has a few bugs to work out and then they should be ready for sale. Daystar is right here in Phoenix, AZ.
I next asked him for his professional opinion on the projected release date and he estimated about a month and that this could change.
I also asked the estimated cost and he told me somewhere around $200. but didnt or couldnt yet give me a definate locked in number just yet.
Daystar does NOT sell direct to the public, With my connections with this design engineer there at Daystar I was able to secure permission from him & Daystar (we are friends) to use his account and password to order these kits when they become available. While we are waiting for these kits, I will have to also check with the site administrator before I can do this due to a possible conflict of interest of me being a staff member here and selling these kits. If he says no, then we will make other arrangements.
I told him to either call me or email me when he has them ready.
*Note to Imdone: This action was done to help our members get inforamtion more directly from the person whos actually building them there at Daystar and not through a series of people at Daystar. ( I felt that doing it this way would be faster) It is no way meant as any kind of way of "going around" you. Please take this in the spirit that its meant to be in.
In a related note, this guy was advertising a 1" body lift for the Tundra, but the last time I checked with him a while back it was still in preliminary stage. Regardless, there is lots of good info on 1" or mild body lifts and the advatages when combined with a suspension lift if someone was interested in reading some info to help them decide. Hope the link works.
[COLOR=Blue]*Note to Imdone: This action was done to help our members get inforamtion more directly from the person whos actually building them there at Daystar and not through a series of people at Daystar. ( I felt that doing it this way would be faster) It is no way meant as any kind of way of "going around" you. Please take this in the spirit that its meant to be in.
I'm sure Imdone will appreciate it... I sure do! Thanks fyr145!
__________________
Armada 176 AR5s Skis, Look P12 Jib Bindings, Rossignol Bandit B1 Boots, Scott Poles... in the bed of a 2000 V8 Tundra 2x4 Access Cab with:
JBA Titanium Coated Headers, Stone Mountain Racing Y-Pipe, Flowmaster 50 Exhuast, Teamwest Sway-A-Way Coilovers, Camburg Upper Control Arms, Wheeler's Add-A-Leafs, AEM Brute Force Intake, MB Quarts, US Acoustics Amp, Bazooka Tube, Lots of Dynamat, A.R.E. LSII Tonneau Cover, Sir Michaels Rollpan, Bushwacker Flares, Shaved BSM, Billet Grilles, Mickey Thompson Classic Locks, 305/70/16 Pro-Comp X-Terrains, Lots of little things here and there. Future Projects: Color-Coded White Rear Bumper and Tailgate handle, Revalve SAWs, Deaver 11 Leaf Packs, Bilstein 5100 Rear Shocks.
All this info repeated here!
Dear god you own. Thanks a ton for doing this. And, I'm in if/when/how this works out. But, I still don't understand how you can use the front engine covers. I checked mine and there doesn't seem to be much slack.
Quote:
Originally Posted by fyr145
[COLOR=Royal Blue]Hey Gang,
I just got off the phone with the guy thats actually designing this 1" body lift. He informs me that he has a few bugs to work out and then they should be ready for sale. Daystar is right here in Phoenix, AZ.
I next asked him for his professional opinion on the projected release date and he estimated about a month and that this could change.
I also asked the estimated cost and he told me somewhere around $200. but didnt or couldnt yet give me a definate locked in number just yet.
Daystar does NOT sell direct to the public, With my connections with this design engineer there at Daystar I was able to secure permission from him & Daystar (we are friends) to use his account and password to order these kits when they become available. While we are waiting for these kits, I will have to also check with the site administrator before I can do this due to a possible conflict of interest of me being a staff member here and selling these kits. If he says no, then we will make other arrangements.
I told him to either call me or email me when he has them ready.[/COLOR]
*Note to Imdone: This action was done to help our members get inforamtion more directly from the person whos actually building them there at Daystar and not through a series of people at Daystar. ( I felt that doing it this way would be faster) It is no way meant as any kind of way of "going around" you. Please take this in the spirit that its meant to be in.
__________________ 2002 Limited TRD Tundra 4x4
Unichip / ASP Underdrive Pulley / K & N FIPK / Bassani Split Side Deuces / White Powdercoated ARB Sahara Bar with IPF 900XS lights and Warn M10000 Winch / Demello Offroad Sliders / ORS Manual Hub Conversion / TRD Limited Slip Differential / Fabtech Performance 3" Lift / Fabtech Performance Rear Shocks / Fabtech 1.5" Add-A-Leaf / 285/75/16 BFG All Terrains / Mickey Thompson Classic II's / Total Chaos Uniball Upper Control Arms / Total Chaos 1" Differential Drop Spacer / Bates Porsche 930 CV Boots / White C/R/C Taillights / TRD Radiator Cap / Molly Designs I.S. Grille w/TRD Emblem / Clear corners / 20% Tint / Better Built Quantum ATB Series bed box / White Rhino Liner / Odyssey PC1700MJT Battery / Wilson 4' White Fiberglass Whip / Cobra 29 WX NW ST CB/PA / Viper 791XV Responder w/530T Window Roll-Up/Down module / Focal 165K2 Polykevlar component set / U.S. Acoustics USX4085 amp / Alpine CDA-7998 / JL Stealthbox
2003.5 BMW M3
Supersprint Sport Exhaust / 15% Tint / CSL Trunklid / CSL Diffusor / 6000k HID Headlights and Foglights / BHS Pulleys
If i did get permission from the boss, wouldnt it be nice to have a GB run and approved by someone you know,trust and can rely on ? !
Oh yes, IF I got permission, I would have to follow the GB Policy just like ya'll have to, this applies to me as well ya know.
Maybe let Imdone do it and I'll take care of the rest. This would seem to be a better process where each person knows what each other is doing during the entire process!!!
Opinions?
I gotta go PM the boss for a ruling on this unique situation.......wish me luck.
GOOD LUCK!!!!!! cause U-DA-MAN for all u do ,this BUD'S for U , the next one is for me
__________________ 2002 TUNDRA AC 2WD = NOT STOCK
MODS: TRD LSD w/4.88's| TRD Headers | Flowmaster 50 Series SUV | TRD Supercharger | Hellwig Rear Sway Bar (custom end links) | TOYOTA Power Antenna | Rear "AIR RIDE" w/ on board compressor | De-badged | Raybrig Headlights & Nokya yellow Foglights | Keyless Upgrade to Full Alarm | Toyota Air Filter | Horn Mod | Map Light Mod | Back Seat Mod | STUBBS Sliders | AXIS Wheels w/315/75-16 Yokohama Geolander MT + | Home Link | SUPERLIFT Tru-speed-speedo Recalibrator | McKesh Mirrors l 3" Body Lift w/Poly Body Mounts l Gap Gaurds l Stainless Brake Lines l Poly Sway Bar Bushings l Poly Rear Leaf Spring Bushings l Clear/Red/Clear Tailights l Black Corners & Headlight Assy's l Diff breather Mod l Nu-Image Blue Flame Gauges l Eclipse AVN5435 w/ Rev Cam & 8 disk changer l Custom rear roll pan w/lights l RCD 6" lift w/ 3" blocks and AAL l Camburg UCA's l High Lift Jack l Daystar Front & Rear Bumpers l 4 Hella Black Magic Lights l Budbuilt Trac Bar l ICOM 706 MKIIG l Doran tire pressure sensors
25 yrs with TOYOTA
MDT/Shop Foreman/FINDLAY TOYOTA
ASE Certified Master Automotive Technician
Official Pro Comp Certified Installer & Dealer
Official ICON Certified Installer & Dealer
Certified Toyota Forklift Operator
Certified Locksmith
Ham Radio Operator = KE7WLF
If i did get permission from the boss, wouldnt it be nice to have a GB run and approved by someone you know,trust and can rely on ? !
Oh yes, IF I got permission, I would have to follow the GB Policy just like ya'll have to, this applies to me as well ya know.
I gotta go PM the boss for a ruling on this unique situation.......wish me luck.
good news !
I have just received permission from the site administrator approving my position of authorizing a GB eventhough I could be the one selling the body lifts WHEN they come out.
Now its time to wait and see what Daystar does.
(I would like to still have Imdone work as a team on this project with me! )
I think both FYR145 and Imdone should get a big thank you for taking the ball and running with it in the interest of the entire group. Hopefully you guys can work together to see this effort through as a team. I know I am definitely interested in knowing more about the kit. I can see an AZ mod party in the future.
__________________ Factory:Leather, Tow Pkg., Tundra Floor Mats, RS 3000 Security, Six Disc In-dash CD Changer, TRD Off Road Package, Toyota bed extender, auto-dimming mirror, and running boards Add-ons: INYATI bed liner, Lund hood deflector, Stainless Billet grille, Full tint, Tundra Door sill protectors, Putco s/s bed caps, Delta polished aluminum tool box, Whelen four-way strobe, Bridgestone Dueler A/T Revos 275/70/16's, Throttle Body and Relay/Fuse Billet Covers Performance: True Flow intake and air filter, 20% Underdrive pulley, Jet Hot SS Autochrome Headers, Power Stop Cross-drilled Rotors & Maxxis Pads, Flowmaster cat-back dual exhaust. Audio: Alpine V12 amp, Kicker two-way front speakers, Rockford-Fosgate two-way rear speakers, Boston Rally Neo 3r tweets, Phoenix Gold 500.1 sub amp, Twin Rockford-Fosgate 8's in a Q Logic sub enclosure, sound deadening, XM SKYFi2 Satellite Radio Suspension: Revtek 2.5" suspension lift ,1.5" rear leveling block, Hellwig anti-sway bar w/ ADDCO end links, TRD Red/Blue shocks, TRD Add-a-leafs Mods: Rear seat angle, Dome/ Dash/Fog/DRL and Cargo Light Mods,Under carriage lights, Ignition Key and Open Door Chime Mods, Silverstar head and fog lamps, Power tailgate lock
I was getting it from one of the engineers working on the kit named Clay. It was his truck that the kit was on when I saw it. If you can get better info though then more power to ya.
The ability to use the account at Daystar is definetly a big help and if you want me to help on this just let me know. If I hear anything new I will post.
Quote:
Originally Posted by fyr145
Hey Gang,
I just got off the phone with the guy thats actually designing this 1" body lift. He informs me that he has a few bugs to work out and then they should be ready for sale. Daystar is right here in Phoenix, AZ.
I next asked him for his professional opinion on the projected release date and he estimated about a month and that this could change.
I also asked the estimated cost and he told me somewhere around $200. but didnt or couldnt yet give me a definate locked in number just yet.
Daystar does NOT sell direct to the public, With my connections with this design engineer there at Daystar I was able to secure permission from him & Daystar (we are friends) to use his account and password to order these kits when they become available. While we are waiting for these kits, I will have to also check with the site administrator before I can do this due to a possible conflict of interest of me being a staff member here and selling these kits. If he says no, then we will make other arrangements.
I told him to either call me or email me when he has them ready.
*Note to Imdone: This action was done to help our members get inforamtion more directly from the person whos actually building them there at Daystar and not through a series of people at Daystar. ( I felt that doing it this way would be faster) It is no way meant as any kind of way of "going around" you. Please take this in the spirit that its meant to be in.
Daystar body lift kit info!
for all u do ,this BUD'S for U , the next one is for me 
approved !
Linear Mode
