That's the longest thread I've ever seen that still managed to have information in it till the end. It's unfortunate that it had to take 2 years to finish it, but now it will finally be done. The next step will be getting new spindles cast and machined for the latest models. Hope that doesn't take so freakin long...
I've seen a post on this thread that RCD will be including a set of new coilovers in their kit, however, I do not see them in the pics of the kit posted on their website. Does anyone know if a set will be included or not? By the way,
has anyone seen Triggs75, I believe that's his handle, setup? That is pretty much how I would like my truck to look except for the front needs to be about an inch lower in the front. Will RCD be able to provide that look?
I've seen a post on this thread that RCD will be including a set of new coilovers in their kit, however, I do not see them in the pics of the kit posted on their website. Does anyone know if a set will be included or not? By the way,
has anyone seen Triggs75, I believe that's his handle, setup? That is pretty much how I would like my truck to look except for the front needs to be about an inch lower in the front. Will RCD be able to provide that look?
Probably. I've got the same set-up as Triggs and love it. Check my pics if your curious. I just haven't posted new pics yet with the 35's.
__________________
2001 Tundra Limited 4X4
Tuff Country 4" lift, Kings 2.5" coilovers
Goodyear MTR 315/75/R16 on Ultra 16X8's
Pioneer DEH-P7300 CD player/changer controller
Pioneer DEQ-7600 Graphic Equalizer
Pioneer CDX-P1270 12 disc changer
Rockford Fosgate 250.2 Sub amp
JL Audio 8W3V2 4 ohm DVC Subs (2)
QLogic sub enclosure
Stull grill
Galaxy DX95T
Wilson 1000
I've seen a post on this thread that RCD will be including a set of new coilovers in their kit, however, I do not see them in the pics of the kit posted on their website. Does anyone know if a set will be included or not? By the way,
has anyone seen Triggs75, I believe that's his handle, setup? That is pretty much how I would like my truck to look except for the front needs to be about an inch lower in the front. Will RCD be able to provide that look?
Thanks for the complement. And I got the set-up from looking at Zombie's pics also. Don't you love this site...
Thanks for the complement. And I got the set-up from looking at Zombie's pics also. Don't you love this site...
Chad
Hey Triggs75,
I'm just curious why you didn't go with the 315/75/16 instead. Wouldn't that make the tires wider? Would they rub too much or not fit at all? If you don't mind, could you tell me how much you paid for the wheels/tires total? Thanks.
I'm just curious why you didn't go with the 315/75/16 instead. Wouldn't that make the tires wider? Would they rub too much or not fit at all? If you don't mind, could you tell me how much you paid for the wheels/tires total? Thanks.
The 315 is what the width is. 70 and 75 are ratio's and the height of the tire or your sidewall. So I do have a little less sidewall since I got the 17's instead of 16's.
As far as pricing, the rims were $1500 out the door and tires were $960 tax, balnce, chrome valve stems, everything out the door. The rims were custom made by boze and took 3 weeks to do, but well worth the wait. They make them to what ever spec you want. They made them with a 3 5/8" backspacing, which was key and works wonders with clearance from the spindle, and frame.
The picture of the kit shows the yellow bilsteins which are now zinc plated and the kit doesn't come with new coil springs just new shocks on all four, which the picture does show, two front and two in the rear.
Quote:
Originally Posted by TundraBlue03
I've seen a post on this thread that RCD will be including a set of new coilovers in their kit, however, I do not see them in the pics of the kit posted on their website. Does anyone know if a set will be included or not?
About 5 minutes ago I got an email that the first 10 kits are being packed up and getting ready to go to some local installers. From there, it will go to national distribution, but I don't know when they make that decision. Probably when the local installers give us some feedback. I am pretty sure that orders were being taken a few weeks ago at the SEMA show. You might want to look into places that sell and/or install RCD kits. They might have some on order, or be in contact with our sales department. We don't sell customer direct. I would also imagine that if you are the sales guys' email list for this kit, they'll be sending out info as soon as they figure it all out.
rockymountainsusp.com has listed the RCD lift as available and at a cost of $2366.00 little pricy but its a start, I would love to be a "test vehicle" and I can test things very hard but until this kit drops in cost I think I will have to make due for now. BUT REST ASSURED!!! I will be watching this kit closely
__________________ HAVE YOU DRIVEN OVER A FORD LATELY?
Team West SAWS (cranked up to 3.25")
Total Chaos UCA
ORS Manual hub kit
reese front receiver hitch
10,000 lb. winch on receiver hitch
Warn Quick connects front and rear
rear brake porportioning valve mod
3" perfomance products body lift
skyjacker AAL
wheelers urithane kit for front swaybar and steering rack
BFG AT's
Eagle101 wheels
CB radio W/ dual fiberglass 48" ant.
We should be shipping our 6" Tundra 2WD/4WD suspension system to our dealers
in the next 2-4 weeks. System will fit 1999 through vehicles built before
August of 2003. We do not do any direct retail sales we are strictly the
manufacturer, but if you would like me to refer you to a dealer in your area
for pricing and availability please provide me with your city, state and zip
code. If you have any questions please feel free to e-mail me back.
RCD Lift Info, PART 2
but until this kit drops in cost I think I will have to make due for now. BUT REST ASSURED!!! I will be watching this kit closely
Linear Mode
