this is not for everyone, but wanted to hear from those interested.
i was referred to someone that could fabricate a drop kit for the sequoia and tundra and was wondering who would be interested. i've gotten many PMs in regards to this, so just wanted to know who is still interested. btw, i don't have any specifics for now, but the kit will be a close match to the TRD kit. i'll try to find out on monday what the kit will consist of.
UPDATES on TRD and Eibach: TRD is not going to mass produce the prototype kit that was on the two SEMA sequoias and Eibach still has no updates on any lowering springs.
PM me or reply to this thread if you are interested.
thanks,
Chris
__________________ 2001 Sequoia 2WD SR5 Mods: Rollers - 18x9 JAOS Super Ziga wrapped w/ 285/65 BFG A/Ts, Suspension: SAW 2.0 Adj. Coilovers, UCAs, Rear Coilspacers I.C.E. - Clarion H/U w/ built in monitor, DVD Player, Drop Down, Headrest Monitors, Exterior: - Stock OEM Foglights, Wings West Spoiler, Engine:TRD Drop-In Filter
Simias
The Lowering Kit sounds really good. I am sure a lot of people have been waiting for something like this. Update us once you get more info on price and what the kit comes with. I also would like to know how much will it drop the vehicle?
hi chris,
make sure you count me in buddy, i have been wanting to lower my ride. i am almost getting to the point of moving up to 23's but then again i don't want to sacrifice the smooth ride i get on my 20's.
thanx
john
whats up all. i just did a custom 5/7 drop on my tundra. Its rides pertty smooth, but i had to do some really custom stuff to get it this low. Let me know what you guys think.
whats up all. i just did a custom 5/7 drop on my tundra. Its rides pertty smooth, but i had to do some really custom stuff to get it this low. Let me know what you guys think.
looks smooth. front's bagged, yeah? def. post up on the "lowered trucks" thread, i think a lot of people would like to see/hear about this.
whats up all. i just did a custom 5/7 drop on my tundra. Its rides pertty smooth, but i had to do some really custom stuff to get it this low. Let me know what you guys think.
I think it looks great. I remember a thread where you posted about going from 22s to 26s. Have you had a chance to put either of these wheel setups on yet? More, bigger pics with or without the other wheels would be great. Good job!
__________________ White 2000 SR5 4x2 Tundra
22x9.5 ADR Magnus wrapped in Toyo Proxes S/T 305/40/22, S&S long tube headers & Y-pipe, R.A.P.S., Trenz grill, clear corners, X-Pel Clear Bra, HID Conversion Kit, 55W auxiliary reverse lights, Sir Michaels roll pan w/ hidden hitch, EuroTails, DeBadged, Granite dash kit, IS color keyed bumper, fender flares & mirror covers, Hellwig Anti-Sway Bar, CST leather interior, sound deadener all 4 doors, rear wall and floor pans, Nu-image guage cluster & A/C panel, blue split loom, PPD billet TB cover and fuse box cover, painted calipers & drums, dropped the rear 2" w/Belltech 6400, Color-keyed body side molding, Alpine H/U, Archos 20GB Jukebox Multimedia wired to H/U, JBL 1200.1 pushing 2 RE XXX 10s in a custom console box, RF 551X pushing Diamond Audio M561 comps in the doors and Alpine SPR-175 comps in the kicks, and JL Audios in rear straight from the H/U
I might be interested, still deciding what to do with the SQ. How much do you expect the cost to be? I am assuming the springs would drop the back ~2" to level it out? /Mike
__________________
2001 2WD Silver Tundra: 4x4 TRD springs, Daystar 1", Carson AAL, red/blue Bilsteins, 265/75 Revo's, IS kit(minus bumper) and rims(hand polished), RF851X amp, Alpine HU, JL 6.5"XR comps, Qlogic with JL 8W3V2 subs. 185k miles and counting......
2005 Silver Sienna LE with 12" Overhead DVD
whats up all. i just did a custom 5/7 drop on my tundra. Its rides pertty smooth, but i had to do some really custom stuff to get it this low. Let me know what you guys think.
Very nice. I see that you've done significant other work though. If I'm not mistaken, those are Lexus RX-300 headlights ! Give us some details on that job.
__________________ 2002 Limited TRD Tundra 4x4
Unichip / ASP Underdrive Pulley / K & N FIPK / Bassani Split Side Deuces / White Powdercoated ARB Sahara Bar with IPF 900XS lights and Warn M10000 Winch / Demello Offroad Sliders / ORS Manual Hub Conversion / TRD Limited Slip Differential / Fabtech Performance 3" Lift / Fabtech Performance Rear Shocks / Fabtech 1.5" Add-A-Leaf / 285/75/16 BFG All Terrains / Mickey Thompson Classic II's / Total Chaos Uniball Upper Control Arms / Total Chaos 1" Differential Drop Spacer / Bates Porsche 930 CV Boots / White C/R/C Taillights / TRD Radiator Cap / Molly Designs I.S. Grille w/TRD Emblem / Clear corners / 20% Tint / Better Built Quantum ATB Series bed box / White Rhino Liner / Odyssey PC1700MJT Battery / Wilson 4' White Fiberglass Whip / Cobra 29 WX NW ST CB/PA / Viper 791XV Responder w/530T Window Roll-Up/Down module / Focal 165K2 Polykevlar component set / U.S. Acoustics USX4085 amp / Alpine CDA-7998 / JL Stealthbox
2003.5 BMW M3
Supersprint Sport Exhaust / 15% Tint / CSL Trunklid / CSL Diffusor / 6000k HID Headlights and Foglights / BHS Pulleys
I think it looks great. I remember a thread where you posted about going from 22s to 26s. Have you had a chance to put either of these wheel setups on yet? More, bigger pics with or without the other wheels would be great. Good job!
Hey whats up okctundra. Thanks man! I did alot of custom work in order for it to sit this low. No i haven't put any wheels on my truck yet. I haven't seen any wheels that i like yet. im still searching Im going to do Air bag my truck b4 i get rim's tho. I mean i want rim's now but i do rather wait until then. I'll post up more pic soon.
I might be interested, still deciding what to do with the SQ. How much do you expect the cost to be? I am assuming the springs would drop the back ~2" to level it out? /Mike
Very nice. I see that you've done significant other work though. If I'm not mistaken, those are Lexus RX-300 headlights ! Give us some details on that job.
Hey man. thanks for knowing. I didnt think many ts member would figur it out yet. But yes Its 02 Lexus RX300 Headlights on my truck. I been wanting to do this conversion for a long time now. Its easy but also not easy to do it. It took me sum time to do it. Alot of cutting was done, Most of all it fit in where the old headlights where lined up on top. i just had to cut some of the coresupport so the light can fit in deeper, cut Fenders, and removed the bumper filler out to make everything to fit. I havent fully finsh my conversion yet i still have to fill in the wholes on the hood where the old headlights set at. Then I'm going to do a lexus grill. Here's a close up pic.
Hey man. thanks for knowing. I didnt think many ts member would figur it out yet. But yes Its 02 Lexus RX300 Headlights on my truck. I been wanting to do this conversion for a long time now. Its easy but also not easy to do it. It took me sum time to do it. Alot of cutting was done, Most of all it fit in where the old headlights where lined up on top. i just had to cut some of the coresupport so the light can fit in deeper, cut Fenders, and removed the bumper filler out to make everything to fit. I havent fully finsh my conversion yet i still have to fill in the wholes on the hood where the old headlights set at. Then I'm going to do a lexus grill. Here's a close up pic.
Dude that's gunna look sick. You ought to go with HID's if those lights don't already have them. Keep us updated though.
__________________ 2002 Limited TRD Tundra 4x4
Unichip / ASP Underdrive Pulley / K & N FIPK / Bassani Split Side Deuces / White Powdercoated ARB Sahara Bar with IPF 900XS lights and Warn M10000 Winch / Demello Offroad Sliders / ORS Manual Hub Conversion / TRD Limited Slip Differential / Fabtech Performance 3" Lift / Fabtech Performance Rear Shocks / Fabtech 1.5" Add-A-Leaf / 285/75/16 BFG All Terrains / Mickey Thompson Classic II's / Total Chaos Uniball Upper Control Arms / Total Chaos 1" Differential Drop Spacer / Bates Porsche 930 CV Boots / White C/R/C Taillights / TRD Radiator Cap / Molly Designs I.S. Grille w/TRD Emblem / Clear corners / 20% Tint / Better Built Quantum ATB Series bed box / White Rhino Liner / Odyssey PC1700MJT Battery / Wilson 4' White Fiberglass Whip / Cobra 29 WX NW ST CB/PA / Viper 791XV Responder w/530T Window Roll-Up/Down module / Focal 165K2 Polykevlar component set / U.S. Acoustics USX4085 amp / Alpine CDA-7998 / JL Stealthbox
2003.5 BMW M3
Supersprint Sport Exhaust / 15% Tint / CSL Trunklid / CSL Diffusor / 6000k HID Headlights and Foglights / BHS Pulleys
Dude that's gunna look sick. You ought to go with HID's if those lights don't already have them. Keep us updated though.
Thanks dude!
No the headlights didnt come with the H.I.D's. But I went ahead and bought me a H.I.D Kit. Yeah I knew from the start these lights need H.I.D's. I'll take a pic of it at nite soon and i'll post it up....
Lowering kit
anything to kill that HUGE gap!
! Give us some details on that job.
Im going to do Air bag my truck b4 i get rim's tho. I mean i want rim's now but i do rather wait until then. I'll post up more pic soon.
But yes Its 02 Lexus RX300 Headlights on my truck. I been wanting to do this conversion for a long time now. Its easy but also not easy to do it. It took me sum time to do it. Alot of cutting was done, Most of all it fit in where the old headlights where lined up on top. i just had to cut some of the coresupport so the light can fit in deeper, cut Fenders, and removed the bumper filler out to make everything to fit. I havent fully finsh my conversion yet i still have to fill in the wholes on the hood where the old headlights set at. Then I'm going to do a lexus grill. Here's a close up pic. 
Thanks dude!
Linear Mode
