You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Suspension & AxleTechnical discussions regarding alignment, stock and modified suspensions, lift kits, axles, hub conversions, gearing and steering.
This is a discussion thread titled "Finishing my truck suspension", within the Suspension & Axle forum, part of the Technical & Vehicle Assistance Forums category.
Finally....I have the UCA's from Bill West and the new Tuff country spindles will be installed tomorrow. I am going to do an AAL and lift the front another !.5 inches.. I will take pics and let every see the finished product.
Last but not least I am waiting for a gear set for this truck.. Dang, CMON! AFTERMARKET!
__________________ 2006 DC Tundra 4x4 Limited. TC 4.5 lift, Teamwest coilovers, MKW 18x10-4.5bs with toyo open country MT's 33x12.5x18, N-fab color matched nerf bars. Camburg upper control arms/ TC spindles, Rear Bilstein 5100 shocks, Bazooka sub, Snuglid SL Future mods: I would love to regear when available..
My problem is the ABS brake sensors. I want to raise the front of truck higher (1.5") but the sensors are maxed..I need to figure something out.
I also have matching snuglid on order and I would love to do 4.56's if they were available..
__________________ 2006 DC Tundra 4x4 Limited. TC 4.5 lift, Teamwest coilovers, MKW 18x10-4.5bs with toyo open country MT's 33x12.5x18, N-fab color matched nerf bars. Camburg upper control arms/ TC spindles, Rear Bilstein 5100 shocks, Bazooka sub, Snuglid SL Future mods: I would love to regear when available..
__________________ 2004 Black Tundra ACI 4WD I TRD I LSD I 4.88s I Camburg UCAs I RCD 6" I 3" Body Lift I Gap Guards I 35"x14.50 Nitto Mud Grapplers I 16x10 Rock Crawler Black Streetlocks I Flowmaster 50 Series w/ 3" Pipe Dumped I Debadged I Snuglid SL I Tint I RE I Qlogic I Orion I RS3200plus upgrade I Differential Breather Extension I Back Seat Mod I TC steering rack bushings II
wish list I auxillary fan I bestop powerstep I jba headers I unichip I 4" custom rear springs I grill I black headlights I shaded taillights I remote sl lid opener I wet okole seatcovers I dvd/navi I the list goes on and on
1987 Toyota Pickup I XtraCab I 4WD I 22r I MSD Helicoil I 32/36 Weber I Hooker Header I Straight Pipe to Flowmaster 50 series I 33" BFG Mud Terrains I Centerlines I Smittybuilt Sides and Rear II
wish list I SAS I 4 link I 20r head I 5.29 gears I 35's I ARB lockers I atlas tc
dream truck I '84 4runner (I'll settle for an '85)
Thanks guys for the props! That spacer is part of the Tough Country kit. It isnt a spacer lift.
Quote:
Originally Posted by lsturbointeg
is that a spacer on top of your team west coilovers?? i'm trying to figure out how to also raise the front end about an inch or so...??
truck looks great by the way...
__________________ 2006 DC Tundra 4x4 Limited. TC 4.5 lift, Teamwest coilovers, MKW 18x10-4.5bs with toyo open country MT's 33x12.5x18, N-fab color matched nerf bars. Camburg upper control arms/ TC spindles, Rear Bilstein 5100 shocks, Bazooka sub, Snuglid SL Future mods: I would love to regear when available..
Is the 06 rear end different than earlier years?? If not, then the 456s have been in production through the aftermarket for some time now. According to precision gear and RR&P. the front diff is different in a 05-06, not the same as 04 and earlier. They said they tried to install gears for a tundra for the SEMA show but could not get them to fit. According to toyota the front diffs are all the same as are the rears, BUT ALL the aftermarket places say they are different. I haven't had 1 apart yet to look and see if my spare set of 4.56's will fit.
Anyone that wants to bring me their front diff and gears, I'd be happy to experiment with them.
As far as the ABS sensors. Are you saying the lines dont have enough slack? Can you unbolt the brackets for more slack?
TS member STEALTHSR5, I did (FIXED) the RCD lift for him and he has ABS. You have to unbolt the brackets (Like dezert_rida said), then zip tie the wires to the knuckle, so they are out of the way. To my knowledge he has not had any issues.
__________________ 2002 TUNDRA AC 2WD = NOT STOCK
MODS: TRD LSD w/4.88's| TRD Headers | Flowmaster 50 Series SUV | TRD Supercharger | Hellwig Rear Sway Bar (custom end links) | TOYOTA Power Antenna | Rear "AIR RIDE" w/ on board compressor | De-badged | Raybrig Headlights & Nokya yellow Foglights | Keyless Upgrade to Full Alarm | Toyota Air Filter | Horn Mod | Map Light Mod | Back Seat Mod | STUBBS Sliders | AXIS Wheels w/315/75-16 Yokohama Geolander MT + | Home Link | SUPERLIFT Tru-speed-speedo Recalibrator | McKesh Mirrors l 3" Body Lift w/Poly Body Mounts l Gap Gaurds l Stainless Brake Lines l Poly Sway Bar Bushings l Poly Rear Leaf Spring Bushings l Clear/Red/Clear Tailights l Black Corners & Headlight Assy's l Diff breather Mod l Nu-Image Blue Flame Gauges l Eclipse AVN5435 w/ Rev Cam & 8 disk changer l Custom rear roll pan w/lights l RCD 6" lift w/ 3" blocks and AAL l Camburg UCA's l High Lift Jack l Daystar Front & Rear Bumpers l 4 Hella Black Magic Lights l Budbuilt Trac Bar l ICOM 706 MKIIG l Doran tire pressure sensors
23 yrs with TOYOTA
MDT/Shop Foreman/FINDLAY TOYOTA
ASE Certified Master Automotive Technician
Official Pro Comp Certified Installer & Dealer
Official ICON Certified Installer & Dealer
Certified Toyota Forklift Operator
Certified Locksmith
Is the 06 rear end different than earlier years?? If not, then the 456s have been in production through the aftermarket for some time now.
As far as the ABS sensors. Are you saying the lines dont have enough slack? Can you unbolt the brackets for more slack?
unfortinately, the front end is different...
__________________ 2006 DC Tundra 4x4 Limited. TC 4.5 lift, Teamwest coilovers, MKW 18x10-4.5bs with toyo open country MT's 33x12.5x18, N-fab color matched nerf bars. Camburg upper control arms/ TC spindles, Rear Bilstein 5100 shocks, Bazooka sub, Snuglid SL Future mods: I would love to regear when available..
TS member STEALTHSR5, I did (FIXED) the RCD lift for him and he has ABS. You have to unbolt the brackets (Like dezert_rida said), then zip tie the wires to the knuckle, so they are out of the way. To my knowledge he has not had any issues.
Hey Mustang, How are things in the Desert? Portland has had a killer summer!
Thanks on the tip. The sensors are now ziptied to the new spindle but I will look at to zip tie it to the knuckle when I get back from my trip. Also, any news on the gears from the precision rep? I'd love to run some 4.56's...
Thanks!
__________________ 2006 DC Tundra 4x4 Limited. TC 4.5 lift, Teamwest coilovers, MKW 18x10-4.5bs with toyo open country MT's 33x12.5x18, N-fab color matched nerf bars. Camburg upper control arms/ TC spindles, Rear Bilstein 5100 shocks, Bazooka sub, Snuglid SL Future mods: I would love to regear when available..
Hey Mustang, How are things in the Desert? Portland has had a killer summer!
Thanks on the tip. The sensors are now ziptied to the new spindle but I will look at to zip tie it to the knuckle when I get back from my trip. Also, any news on the gears from the precision rep? I'd love to run some 4.56's...
Thanks!
Its been warm 102 or so and last night was 45% humidity, but did get down to 76... BLAH... humidity sucks
Still no news from any of the gear manufacturers ,sorry.
I'll keep checking.
__________________ 2002 TUNDRA AC 2WD = NOT STOCK
MODS: TRD LSD w/4.88's| TRD Headers | Flowmaster 50 Series SUV | TRD Supercharger | Hellwig Rear Sway Bar (custom end links) | TOYOTA Power Antenna | Rear "AIR RIDE" w/ on board compressor | De-badged | Raybrig Headlights & Nokya yellow Foglights | Keyless Upgrade to Full Alarm | Toyota Air Filter | Horn Mod | Map Light Mod | Back Seat Mod | STUBBS Sliders | AXIS Wheels w/315/75-16 Yokohama Geolander MT + | Home Link | SUPERLIFT Tru-speed-speedo Recalibrator | McKesh Mirrors l 3" Body Lift w/Poly Body Mounts l Gap Gaurds l Stainless Brake Lines l Poly Sway Bar Bushings l Poly Rear Leaf Spring Bushings l Clear/Red/Clear Tailights l Black Corners & Headlight Assy's l Diff breather Mod l Nu-Image Blue Flame Gauges l Eclipse AVN5435 w/ Rev Cam & 8 disk changer l Custom rear roll pan w/lights l RCD 6" lift w/ 3" blocks and AAL l Camburg UCA's l High Lift Jack l Daystar Front & Rear Bumpers l 4 Hella Black Magic Lights l Budbuilt Trac Bar l ICOM 706 MKIIG l Doran tire pressure sensors
23 yrs with TOYOTA
MDT/Shop Foreman/FINDLAY TOYOTA
ASE Certified Master Automotive Technician
Official Pro Comp Certified Installer & Dealer
Official ICON Certified Installer & Dealer
Certified Toyota Forklift Operator
Certified Locksmith
hey, i remember your truck from cardomain. where did you get those spindles from? i havent heard of anything being out yet. although i did PM you about these that you mentioned in another thread. get back to me, i have a 06 tundra too.
Anyone know if gears are available yet for front on the 05-06 model?
__________________ 2006 DC Tundra 4x4 Limited. TC 4.5 lift, Teamwest coilovers, MKW 18x10-4.5bs with toyo open country MT's 33x12.5x18, N-fab color matched nerf bars. Camburg upper control arms/ TC spindles, Rear Bilstein 5100 shocks, Bazooka sub, Snuglid SL Future mods: I would love to regear when available..
Anyone know if gears are available yet for front on the 05-06 model?
Yes, but only for the REAR.
__________________ 2002 TUNDRA AC 2WD = NOT STOCK
MODS: TRD LSD w/4.88's| TRD Headers | Flowmaster 50 Series SUV | TRD Supercharger | Hellwig Rear Sway Bar (custom end links) | TOYOTA Power Antenna | Rear "AIR RIDE" w/ on board compressor | De-badged | Raybrig Headlights & Nokya yellow Foglights | Keyless Upgrade to Full Alarm | Toyota Air Filter | Horn Mod | Map Light Mod | Back Seat Mod | STUBBS Sliders | AXIS Wheels w/315/75-16 Yokohama Geolander MT + | Home Link | SUPERLIFT Tru-speed-speedo Recalibrator | McKesh Mirrors l 3" Body Lift w/Poly Body Mounts l Gap Gaurds l Stainless Brake Lines l Poly Sway Bar Bushings l Poly Rear Leaf Spring Bushings l Clear/Red/Clear Tailights l Black Corners & Headlight Assy's l Diff breather Mod l Nu-Image Blue Flame Gauges l Eclipse AVN5435 w/ Rev Cam & 8 disk changer l Custom rear roll pan w/lights l RCD 6" lift w/ 3" blocks and AAL l Camburg UCA's l High Lift Jack l Daystar Front & Rear Bumpers l 4 Hella Black Magic Lights l Budbuilt Trac Bar l ICOM 706 MKIIG l Doran tire pressure sensors
23 yrs with TOYOTA
MDT/Shop Foreman/FINDLAY TOYOTA
ASE Certified Master Automotive Technician
Official Pro Comp Certified Installer & Dealer
Official ICON Certified Installer & Dealer
Certified Toyota Forklift Operator
Certified Locksmith
Finishing my truck suspension
2006 DC Tundra 4x4 Limited. TC 4.5 lift, Teamwest coilovers, MKW 18x10-4.5bs with toyo open country MT's 33x12.5x18, N-fab color matched nerf bars. Camburg upper control arms/ TC spindles, Rear Bilstein 5100 shocks, Bazooka sub, Snuglid SL Future mods: I would love to regear when available..
as are the rears, BUT ALL the aftermarket places say they are different. I haven't had 1 apart yet to look and see if my spare set of 4.56's will fit.
,sorry.
Linear Mode
