You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Suspension & AxleTechnical discussions regarding alignment, stock and modified suspensions, lift kits, axles, hub conversions, gearing and steering.
This is a discussion thread titled "Socket size for ubolt nuts?", within the Suspension & Axle forum, part of the Technical & Vehicle Assistance Forums category.
I found out last night, stocks are 19mm. I have aftermarket ones and they are 7/8"
I was trying to fit the 63" chevys last night but the front mount is too close to the rear axle. I'm going to have to get some mounts fabbed and welded on further away from the rear axle in order for them to fit. ARGH!!!! At least I found out that the center pin for the leaf springs had busted.
TundraSolutions.com is a registered trademark of Tundra Solutions, Inc.
Other trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the TundraSolutions.com User Agreement and Privacy Policy.
Socket size for ubolt nuts?
Linear Mode
