Tundra Solutions Logo

Go Back   Tundra Solutions Forum > Technical & Vehicle Assistance Forums > Suspension & Axle
Grease on bearings Grease on bearings
Register All AlbumsBlogs FAQ Members List Calendar Mark Forums Read

Readylift.com


Notices
Welcome to the Tundra Solutions forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Suspension & Axle Technical discussions regarding alignment, stock and modified suspensions, lift kits, axles, hub conversions, gearing and steering.

This is a discussion thread titled "Grease on bearings", within the Suspension & Axle forum, part of the Technical & Vehicle Assistance Forums category.

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09-11-2006, 10:52 PM
Big_Al1's Avatar
 
My Garage
Dealer : Lake Charles Toyota
2005 Toyota Tundra,
2008 Toyota Sienna XLE
My eBay Big_Al1's Photo Albums
Last Online: Yesterday 09:32 PM
Join Date: May 2005
Location: Lake Charles,LA
Posts: 1,534
Rep Power: 5
Big_Al1 is on a distinguished road.
Send a message via Yahoo to Big_Al1
Question Grease on bearings
Can anyone help I need to do a grease job but can't seem to find were the fittings are on truck.Any pics would be appreciated or advice.Thanks
Reply With Quote

  #2 (permalink)  
Old 09-11-2006, 11:16 PM
 
My Garage
Dealer : Camelback Toyota Scion
2005 Toyota Tundra,
- Other - 96 Acura 3.2 TL
tempetom's Photo Albums
Last Online: Today 10:37 AM
Join Date: May 2005
Location: Tempe, AZ
Age: 70
Posts: 1,017
Rep Power: 5
tempetom is on a distinguished road.
Default Re: Grease on bearings
If you have a 2wd, I don't believe there are any. If 4wd, they're along both drive shafts and at the U-joints.
Reply With Quote
  #3 (permalink)  
Old 09-11-2006, 11:55 PM
cupidstoy's Avatar
 
My Garage
Dealer : Reliable Toytota
2004 Toyota Tundra,
2003 Toyota Corolla Lola
cupidstoy's Photo Albums
Last Online: 11-14-2008 02:13 PM
Join Date: Jun 2005
Location: Central Midwest (KS, MO)
Posts: 862
Rep Power: 4
cupidstoy is on a distinguished road.
Default Re: Grease on bearings
that is correct. there are one on each end of the front drive shaft, one on each end of the rear drive shaft, 3 on the double cardan and one on the slide yoke.
__________________
2004 Tundra DC Limited Phantom Perl Gray w/ Oak Leather Interior (power sunroof, Kazuma TRD LSD, Advance 4 panel hard tonneau cover, Hellwig antisway bar, lighted running boards, dual battery setup with 1500 watt 120 volt power inverter, additional 'always-on' 12 volt outlets, aftermarket dual zone heated seat kits, Blizzack W965 LT235/85R16 winter tires on stock steel rims, JBA cat-forward titanium ceramic coated headers, tinted front driver's and passenger's windows, alignment to DJ's specs, Roadmaster VR-3 backup camera, Waeco 12 volt fridge/freezer, and, the best for last.... black rubber floor mats from Sams.)

Wish list: too long, wife would kill me!

1993 Nissan 240SX SE Coupe Burgandy w/ Gray/Black Interior (Eibach Sport lowering springs, GAB adjustable struts, custom fabbed front strut bar, powerstop cross-drilled rotors, Axxis metal master pads, stainless brake lines, American Eagle alloy 17" rims, P215/45R17 tires, short throw shifter, borla stainless cat back, K&N filter w/ ram air feed and insulated intake pipe, Flex-a-lite twin thermostatically controlled cooling fans; Optima redtop battery, powered sub, sony amp w/ Pioneer/Alpine speakers and factory HU, sunroof, heads-up display speedo)


2003 Corolla (bone stock, but well loved and cared for!)

"Expect the impossible."
- JC and the Brothers of Thunder
Reply With Quote
  #4 (permalink)  
Old 09-12-2006, 01:50 PM
Big_Al1's Avatar
 
My Garage
Dealer : Lake Charles Toyota
2005 Toyota Tundra,
2008 Toyota Sienna XLE
My eBay Big_Al1's Photo Albums
Last Online: Yesterday 09:32 PM
Join Date: May 2005
Location: Lake Charles,LA
Posts: 1,534
Rep Power: 5
Big_Al1 is on a distinguished road.
Send a message via Yahoo to Big_Al1
Smile Re: Grease on bearings
Quote:
Originally Posted by tempetom View Post
If you have a 2wd, I don't believe there are any. If 4wd, they're along both drive shafts and at the U-joints.
Thanks so I guess i don't have any . 2wd.
Reply With Quote
Reply



« Lowering a Taco prerunner | SOS 2"/4" kit installed »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads for: Grease on bearings
Thread Thread Starter Forum Replies Last Post
CV joint grease ???'s vorra65 Engine & Drivetrain 5 12-22-2006 02:43 PM
truck lurches forward when brakes are depressed bbfirebird Engine & Drivetrain 24 09-29-2006 04:50 PM
Grease for front bearings? S-Man Tires and Wheels 1 06-21-2006 03:58 PM
First grease job filhiol Engine & Drivetrain 4 02-24-2003 11:54 AM
Grease Zerts on Drivetrain nhparrot Engine & Drivetrain 0 03-28-2002 03:58 PM




All times are GMT -5. The time now is 02:39 PM.
Contact Us - TundraSolutions.com - Archive - Privacy Policy - Top

TundraSolutions.com is a registered trademark of Tundra Solutions, Inc.
Other trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the TundraSolutions.com User Agreement and Privacy Policy.