Question disarm factory alram?

dano420 · #1 (**permalink**) 05-29-2008, 05:30 PM

I have a 1996 Toyota Tocama and I unhooked the battery, now when I hook the battery back up it arms the alarm system and when the hood is closed or the door is opened the alarm goes off. Could someone tell me how to disarm it? I have tried putting the key in the ignition and in the door but nothting's working it does not have keyless entry.

Thanks in advance

Toyotaterritory · #2 (**permalink**) 06-05-2008, 10:04 AM

It all depends which system you have, there are some where it has a toggle switch that lets you put it to valet made and sometimes you have a blinking light on the dash that your able to press.

imjin · #3 (**permalink**) 06-05-2008, 11:50 AM

I found this on a wikianswers site for a 1997 Tacoma... see if this works for you.

"The method for reseting this alarm system sounds a little goofy. But, here is how I have to reset mine: While sitting in the drivers seat, open the passenger door and leave it opened. Turn the key off and on to the accessory position five times. Open and close the driver's door three times. Shut the passenger door."