Anyone install a tailgate on a Tacoma? - Toyota Tundra Forums : Tundra Solutions Forum

vic_ny · #1 (**permalink**) 01-06-2005, 10:37 PM

looked at a '05 taco today but didn't even notice if it had a tailgate lock or not, if it doesn't have one are those insert style ones any good?

Average_Joe · #2 (**permalink**) 01-06-2005, 11:07 PM

I looked at that myself- the Tacoma has no lock on the tailgate. Disappointing because the Tundra has one and is a must to keep the tailgate from getting stolen and keeping the stuff you haul around safe. (happens often here in the phoenix area)

Average_Joe

vic_ny · #3 (**permalink**) 01-07-2005, 05:44 PM

Quote:

Originally Posted by coinneach

Pop & Lock Armored Tailgate Lock - Black Available Around March
http://www.aztrucks.com/product.asp?Product=84

The AZTRUCKS website appears to be showing picture of older model until the new ones arrive.

this is the item i was asking about, how does it work? cheeply made? does it replace the entire stock latch assembly

MarkM · #4 (**permalink**) 02-20-2005, 07:33 PM

If so, who sells them and can you post a pic? Thanks

kbshadow · #5 (**permalink**) 02-20-2005, 08:00 PM

I was worried about the gate being stolen and could not fine a lock for it around here.

So: I took a stainless Steel worm clamp and put it on the hinge, you cant see it and it would be difficult to remove. I installed it so a screwdriver could not be used to remove it, have to use a small Wrench and it would take more time than most thiefs want to take.

I did this on my other pickup and never had a problem and tailgate theft is a big problem around here.

Attaching a photo of the lower right tailgate hinge.

Bob
Stockton Ca

Quote:

Originally Posted by MarkM

If so, who sells them and can you post a pic? Thanks

rivalred · #6 (**permalink**) 02-20-2005, 08:14 PM

Slick mod.... Cheap too.

tacomajay · #7 (**permalink**) 02-20-2005, 08:57 PM

you wouldnt happen to have any other pics would you? it would be greatly appreciated

kbshadow · #8 (**permalink**) 02-20-2005, 09:02 PM

I'll go try and take a couple, still be hard to see but I'll try.

Bob
Stockton Ca

I attached 2 more, lower right hand of the tail gate, over the slot that allows you to remove the tail gate.

Bob

tacomajay · #9 (**permalink**) 02-20-2005, 09:27 PM

wonderful, thanks alot

blazze2005 · #10 (**permalink**) 02-20-2005, 09:50 PM

Why can't I think like that

Awesome Mod keep up the good work!

MERCULA · #11 (**permalink**) 02-20-2005, 10:16 PM

I did the same thing but mine has to be untightened from under the truck
with the tailgate up , Just put it on top facing backwards . Doesnt really matter how you do it , just gives you time to load your hollow points.

Lucky13TRD · #12 (**permalink**) 02-21-2005, 02:47 AM

Quote:

Originally Posted by MERCULA

I did the same thing but mine has to be untightened from under the truck
with the tailgate up , Just put it on top facing backwards . Doesnt really matter how you do it , just gives you time to load your hollow points.

Why not just put the tailgate in the truck when your out shopping or at work

EngineerBoo · #13 (**permalink**) 02-21-2005, 08:25 AM

Great idea! I ordered a Snug Top lid which will have two locks on both rear corners. (I just called and it's not going to be ready for another 10 days...bummer!)