Confirmed Wheel Fitment Thread

[goldmember]

Not that access cabs and four door short beds look bad lifted (they look great), but man....four door long beds look perfect lifted! Nice truck capsized.

[SchoolN'U]

Will these fit?

Size:16x8
Bolt: 6 on 5.5
Offset:+5 mm
BS: 4.625

[Thee]

Volk TE-37X
16x8
0 offset, 4.5bs
clears brakes, body mounts and stock uca. minor rubbing on fenders with 285/75 Toyo MT
it seems i have more clearance on the brakes with the volks than the stock trd sport rims.

hourt

[ffproulx]

I am with 05TacoDoc, do the new DIck Cepek DC-1's fit. They are 16x8 with a 4 inch BS. Not sure of all this backspace issues and they say they are designed with the new trucks in mind with plenty of clearance for calipers. About to pull the trigger on these and would like some advise.

Also, have the 17" stock rims and was gonna try to stay in that size with new tires and wheels, but man, the price and the selection are both horrible. Thinking of going to a 16 for the ease of money and the selection that I will gain. What do yall think?

[tund-rX]

I just installed '05 4Runner Sport wheels on my '05 DC Taco, and they rub against calipers, I though they where more or less the same....

[01gsxr1]

Originally Posted by Thee

Volk TE-37X
16x8
0 offset, 4.5bs
clears brakes, body mounts and stock uca. minor rubbing on fenders with 285/75 Toyo MT
it seems i have more clearance on the brakes with the volks than the stock trd sport rims.

hourt

ahh volks nice picks??

[bane]

Had...

3" Spacer Lift - Ulta Baja Champ - 17x8 w/4-7/8" bs Tires 33x12.50R17 Pro Comp MT. Only minor plastic trimming.

Now...

6" Pro-Comp Lift - Moto-Metal 951 - 17x9 w/4-1/2" bs Tires 315/70R17 (35's) Mickey Thompsom MTZ's. No trimming other than what was already done.

[bigserg]

wats going on guys, i orderd and recieved 33" mickey thompson baja mtz tires, which look great (33 12.50 17) and now need the rims, i was planning on ordering the helo maxx 6 with black finish 17x9.but have heard they mite not fit, any input???

[mdtrdtaco]

16" trd fj wheels
16x7.5
4.5 backspace
265/75r16 tires
no issues.

[herculean]

Originally Posted by capsized

BFG ATs 285 75 R17
Helo Maxx 17"
wanted the 16" but was told they would be too close to the brake calipers.

Not true... I'm running 16x8 Helo Maxx on mine. They argued with me at the shop, but I talked them into test fitting and all was fine.
Note: Have 285/75/16 Nitto Terra Grapplers on with 2.5" Donahoe lift in front.

[Kmceuen]

06' Crew 4x4
3 inch lift
18x9 Helo Xplode
285/60r/18
No problems. looks great, good ride. K-

[BLDG MAN]

Originally Posted by capsized

BFG ATs 285 75 R17
Helo Maxx 17"
wanted the 16" but was told they would be too close to the brake calipers.

Nice looking truck. Do you have a lift installed? Will the 285 75's work on the stock 17" wheels with no rubbing or trimming?

[VividFLEP]

Originally Posted by BLDG MAN

Will the 285 75's work on the stock 17" wheels with no rubbing or trimming?

No, if you put 285's on the stock 17's they will rub the UCA, I believe the stock 17's have a 5.5" bs.

[baffroom]

Originally Posted by herculean

Not true... I'm running 16x8 Helo Maxx on mine. They argued with me at the shop, but I talked them into test fitting and all was fine.
Note: Have 285/75/16 Nitto Terra Grapplers on with 2.5" Donahoe lift in front.

I also have 16x8 Helo Maxx rims, but they're Helo Maxx 8, not 6. The 6's apparently don't fit

[bezam718]

Hey, i'm new to the site and tried searching for awhile to see if this combo would fit, but had no luck. I was wondering if anybody had or know's if you can get 33X12.5 and 4.5 backspacing to fit? If so, any major rubbing...the offset of the wheel i'm looking at is -12 also. thanks ben