Lift and Rims and which tires?

[Speeddemon13]

I have the toytec 3" lift with the rear aal, but I am going to buy aftermarket rims when I decide to get new tires. I am going to get the KMC XD797 Spy Black Rims, the offset is -12 and the backspacing is 4.53 so what size tires can I fit on there without rubbing? I want to get like 33x12 or 33x12.50, so how far are these going to stick out when I get them?? do i need spacers to get bigger tires?

[rtmccormick]

what size rims?

[Speeddemon13]

17x9, i dont want them to stick out too far just a tad

[TundraSurfBum]

17x9 with 4.53 bsp is gonna rub with 33s. you need to be in the range of 4 and less for bsp

[Speeddemon13]

So am I going to need to get spacers? How far are they going to stick out if I dont get any?

[TundraSurfBum]

they should be pretty flush with the fenders since you have flares but you won't be able to lock out left or right

[Speeddemon13]

if i add a small spacer and make it stick out a tad, would i be able to turn all the way? the tundras dont turn very sharp already so dont wanna lose any

[TundraSurfBum]

I would say 1.25" would work

[Speeddemon13]

alright thanks, can you just ask for those when you go buy tires and rims and stuff?

[TundraSurfBum]

check out spidertrax, marlin crawler, or wheeladapters

all .com

[Speeddemon13]

alright thanks, but you cant get them from the place where they put on tires and rims and stuff? just incase i dont need any or anything

[TundraSurfBum]

dunno... you'd have to ask them