Factory Deck Rails and Cargo Management Divider

[BlueBoy]

I was wondering if anyone has a setup like me and has a secure metal cover retractable or sectioned, that will allow me to have full function of the tiedown cleats and especially the factory cargo management divider.

I have a '08 4x4 DC LB with factory deck rails and a factory aluminum cargo management divider. I am searching for either a foldable cover or a retractable cover that will allow me to use the deck rails, cleats, and the factory cargo management divder. The cover must be knife proof and preferred exterior finish be metal, in lieu of vinyl. I have read through many threads and reviewed at least 8 manufacturers. I find that covers for LB are not a common item at manufacturers sites. I also found out that many manufacturer's claim the deck rails will work with their covers only finding out the covers use them or you need to relocate the deck rails below the covers mounting system.

Thank you fellow Tundra Family.

[123Gone]

I think the Pace Edwards Full Metal uses the track rail system bolts and attaches to it. So, you may not get FULL use of the track rails.

What about TruckCoversUSA, did you check that out? I don't think the cover utilizes the track rails or interferes with it, not 100% sure though.

Of course with any retractable cover, you will lose the use of the track rails at the bulkhead.

The Extang Solid Fold is a folding cover that has no hardware to install. It is available for a long bed.

FoldACover: Same story as the Pace Edwards.

[BlueBoy]

Hey Thank you for the information. I checked out the PE and the Fold A Cover and they both use the deck rails. Truck Cover USA is going to take a look at my truck and will see if they can fabricate something maybe.
Thanks again for the info....

[123Gone]

Good luck with that, tell us how it turns out.