Who's installed clear bra

[kwhite1124]

Like the below post, my clearbra came in......Last weekend BHM, this weekend clearbra installation. This d*** truck is taking up all my beer drinkin and layin on the couch time!!!

[Stanton49]

I started on my clear bra but didn't have a heat gun or extension cord for a hairdryer so I'm gonna wait a month or two for warmer weather.

[Jumbo Jet]

I have the 3M on mine. Best investment to the exterior. My truck had it's one year birthday last week and the front and the bra still look as perfect as the day I bought it.

[WT]

I got some precut stuff and applied my own also and save a few pennies... If you click on one of the links in my sig you see pics of it.

[fire_mike]

Where can the 3M film be bought at a good price?

[fire_mike]

Originally Posted by WT

I got some precut stuff and applied my own also and save a few pennies... If you click on one of the links in my sig you see pics of it.

Holy crap - the film goes half way up the hood! I'll assume that's just the way it comes though.

[gtdmb]

You can get the 3M stuff on ebay for a reasonable price

[TundraBuddy]

Did my headlights in about 45 degree weather...big pain in the a$$ to get the stuff to sit down on the edges, but looks good and protects well.

[weverb]

kwhite1124

Here is a pic of my pyrite with a clear bra (2/3 way down):

Tundra body armour/invisi-shield?

I watched the guy do it. You better have a lot of patience, time, garage, and oh yea, patience!

[direwolf]

I had it installed on mine back in January, was no way I wanted to do it so I just paid a professional installer to do it. Glad I did to as I wouldn't have had the patience if I messed up. Also came with a 5 yr warranty. Had the headlights and foglights done too. Will be well worth it once those lovebugs come into season....

[fire_mike]

Originally Posted by direwolf

I had it installed on mine back in January, was no way I wanted to do it so I just paid a professional installer to do it. Glad I did to as I wouldn't have had the patience if I messed up. Also came with a 5 yr warranty. Had the headlights and foglights done too. Will be well worth it once those lovebugs come into season....

What brand did you use? How much was it?

[Jumbo Jet]

Mine doesnt cover 1/2 the hood, but its a good 1/4. He did the hood, front quarter panels, front bumper (upper and lower), leading edge of the roof, A pillars and since he had some scrap he did inside my door sills. It definitely takes some patience. He's a pro and it took him about 5 hours.

Love bugs didnt stand a chance against the bra last season. They wiped right off even after a sitting a few days.

[kwhite1124]

Originally Posted by weverb

kwhite1124

Here is a pic of my pyrite with a clear bra (2/3 way down):

Tundra body armour/invisi-shield?

I watched the guy do it. You better have a lot of patience, time, garage, and oh yea, patience!

That looks great!!!! I can't wait to do mine!!!!

[Trucker1967]

I did mine a few weeks ago with the 3M from ebay ... its a pain but its doable ... the only pain is on the sides of the hood since there is those big dips ... I used a hair dryer to get it to stretch a little and stick it better, otherwise I dont think i would have ever got it right.

below are some video's to watch if you are going to attept this. hopefully when I paste them they will work, if not pm me and I will give you the links.

Movie Title Length of movie Movie size (megs)
Tips for optimal performance 1:37 4.5
Installing a pre-cut kit 5:00 31.2
Advanced techniques 9:54 26.2
Care and maintenance 1:25 1.66
Removing paint protection film :56 2.79


Miscellaneous Movie Set
Movie Title Length of movie Movie size (megs)
Introduction 0:56 1.4
Dealing with Bubbles 1:07 1.7
Installing Small Pieces 0:57 1.4
Completed Installation! 1:10 1.7

[obgod3]

I did it too..well kinda. I send all my rides to the same guy up the street from me, 3M hood, sides and under the headlights for $180.00, Im lazy. $280 including my tint, 15%.