Anybody that ordered this last go around getting better info on their horn(s) shipping than this?
Label/Receipt Number: #### #### #### #### #### ##
Status: Electronic Shipping Info Received
The U.S. Postal Service was electronically notified by the shipper on April 17, 2008 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if / when available. Information, if available, is updated every evening. Please check again later.
that's pretty standard for USPS delivery confirmation. it means the shipper has processed the label, and possibly dropped it off, but not necessarily. give it a day or two and it should update the tracking page or it'll be delivered.
__________________
2.4" front/1" rear leveling kit - toyo A/T 285/75/18 tires - bull bar with hella 500FF lights - 20% tint side and back windows - 55% full windshield tint
in the works:
stock HU -> LOC -> PPI FRX-456 -> DLS A4 + Marathon 6150 -> DLS iridium 6.2 comps + Hybrid-Audio L3's + 4 Tang Band W6-1139SI's
to come:
JBL MS-8 + center channel speaker + components for the rear + sirius adapter for stock HU
Anybody that ordered this last go around getting better info on their horn(s) shipping than this?
Label/Receipt Number: #### #### #### #### #### ##
Status: Electronic Shipping Info Received
The U.S. Postal Service was electronically notified by the shipper on April 17, 2008 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if / when available. Information, if available, is updated every evening. Please check again later.
Yessir... I gots the same thing. Was hoping it would be here this by this weekend so I can git er dun.
Your item was processed and left our ANAHEIM, CA 92899 facility on April 23, 2008. Information, if available, is updated every evening. Please check again later.
__________________
Beer please! CBTMA (Member and Founding Father: Est. August 15, 2008)
Clicky>>> What The Heck is CBTMA
Unknown - "The biological purpose of pain is to prevent the recurrence of stupidity."
Your item was processed and left our ANAHEIM, CA 92899 facility on April 23, 2008. Information, if available, is updated every evening. Please check again later.
Me too! I bet your's wins the race
I don't think I'm going to get to play this weekend.
Let me know how it goes!
Your item was processed and left our FEDERAL WAY, WA 98003 facility on April 24, 2008. Information, if available, is updated every evening. Please check again later.
__________________
Beer please! CBTMA (Member and Founding Father: Est. August 15, 2008)
Clicky>>> What The Heck is CBTMA
Unknown - "The biological purpose of pain is to prevent the recurrence of stupidity."
Your item was processed and left our FEDERAL WAY, WA 98003 facility on April 24, 2008. Information, if available, is updated every evening. Please check again later.
Your item was accepted at 12:54 PM on April 23, 2008 in TUSTIN, CA 92780. Information, if available, is updated every evening. Please check again later.
-------------
Hey guys, has anyone noticed when driving at night, lights on of course, that the lights dim when you honk the stebel? I noticed this last night, sure hope I didn't do anything wrong. Does the horn have this much draw?
__________________
'07 Pyrite crewmax LTD "B" package w/ 18" wheels (BFG 285/65R18 A/T KO) - Purchased April 30/07, hit 100,000kms on Sept 2, 2009. AFE CAI, ARE canopy, hunter bullbar (careful) and running boards, TGC 2.25" front leveler, & husky liners. Air Lift 57299 Air Springs. Front diff changed.
'07 USA market Honda Odyssey EXL-RES imported to Canada (sorry Honda Canada, this one reads MPH)
Hey guys, has anyone noticed when driving at night, lights on of course, that the lights dim when you honk the stebel? I noticed this last night, sure hope I didn't do anything wrong. Does the horn have this much draw?
Errr... that seems a bit strange. How did you wire it in?
Hey guys, has anyone noticed when driving at night, lights on of course, that the lights dim when you honk the stebel? I noticed this last night, sure hope I didn't do anything wrong. Does the horn have this much draw?
how many do you have and how did you wire it/them? they draw a good bit of current, and its an instant on, which can cause a slight voltage drop. but a slight drop is all it takes to cause headlights to dim a little.
__________________
2.4" front/1" rear leveling kit - toyo A/T 285/75/18 tires - bull bar with hella 500FF lights - 20% tint side and back windows - 55% full windshield tint
in the works:
stock HU -> LOC -> PPI FRX-456 -> DLS A4 + Marathon 6150 -> DLS iridium 6.2 comps + Hybrid-Audio L3's + 4 Tang Band W6-1139SI's
to come:
JBL MS-8 + center channel speaker + components for the rear + sirius adapter for stock HU
how many do you have and how did you wire it/them? they draw a good bit of current, and its an instant on, which can cause a slight voltage drop. but a slight drop is all it takes to cause headlights to dim a little.
Mr. Wake,
Have you noticed anything like this with your setup? I haven't received mine yet, but if I recall correctly, the Stebel is fused at 20A? I wouldn't expect a load like this to have a noticeable effect...
Have you noticed anything like this with your setup? I haven't received mine yet, but if I recall correctly, the Stebel is fused at 20A? I wouldn't expect a load like this to have a noticeable effect...
Thoughts?
i honestly haven't honked the horns at night, so i can't say for sure. but an instant 20 amp draw *could* cause enough of a voltage drop to see the light difference. a very slight change in voltage can be very noticeable. the tunda has a pretty good charging system, but you can even see the lights dim slightly when you hold the window roll up button after they are all the way up. the reason why i was asking about how it was wired is because if the wire is too small or it is not grounded well, there will be an increased current draw due to the increased resistance in the wire/ground.
__________________
2.4" front/1" rear leveling kit - toyo A/T 285/75/18 tires - bull bar with hella 500FF lights - 20% tint side and back windows - 55% full windshield tint
in the works:
stock HU -> LOC -> PPI FRX-456 -> DLS A4 + Marathon 6150 -> DLS iridium 6.2 comps + Hybrid-Audio L3's + 4 Tang Band W6-1139SI's
to come:
JBL MS-8 + center channel speaker + components for the rear + sirius adapter for stock HU
well i just took a quick measurement of the voltage. truck idling with headlights and fog lights on was 13.88 volts. using the min data hold on my voltmeter (craftsman clamp meter), it dropped to 13.13 volts. keep in mind that i have two of the stebel horns and both stock horns connected. if i have time later, i'll disconnect the stebels to see how much of a voltage drop the stock horns cause. the stebels are supposed to draw less than 18 amps, so two of them would be between 30 and 36 amps current draw, which for an instant on device is a decent amount.
__________________
2.4" front/1" rear leveling kit - toyo A/T 285/75/18 tires - bull bar with hella 500FF lights - 20% tint side and back windows - 55% full windshield tint
in the works:
stock HU -> LOC -> PPI FRX-456 -> DLS A4 + Marathon 6150 -> DLS iridium 6.2 comps + Hybrid-Audio L3's + 4 Tang Band W6-1139SI's
to come:
JBL MS-8 + center channel speaker + components for the rear + sirius adapter for stock HU
Re: New Stebel 300 Hz Truck Horn
Me too! I bet your's wins the race 
Linear Mode
