Post your 1/4 and 1/8 mile times! - Page 2

s1nger1 · #16 (**permalink**) 05-14-2008, 11:42 AM

I will need to find slip best 1/8 was 8.99 at 78 mph. It ran 8.99, 9.02 and 9.03 for my three runs. All stock no mods.

azmsp84 · #17 (**permalink**) 05-16-2008, 10:56 PM

Ran it last week, ambient tem 80 degrees. Had traction condtrol and vdc off but auto lsd on. Didn't know about the other three second hold....
DCSB 3" leveling kit, Magnaflow cat-back, Air-Raid Intake----14.836 @ 92.952. Feel like if I had Auto-LSD off it would've helped a bit.

Mick44 · #18 (**permalink**) 05-17-2008, 02:56 AM

You guys need to update the list:

Here is the new list!!!

I'll update this page from time to time. If someone post a faster time, you get bumped down the list. Please show a valid picture of your slip or a video of your run.

Please list all of your mods in your post. Also list what size truck you have(double cab, crewmax, etc...)

Top 20 2007-2008 5.7l Tundra 1/4 mile times

1. sfz989______ RCSB____2WD_____13.924 @ 98.8 mph
2. LS2GTO_____ RCSB____???_____14.121 @ 97 mph
3. Mick44 ______RCSB____2WD____14.137 @ 97.32 mph
4. 07rcsb5.7L___RCSB____???_____14.180 @ 97 mph
5. Crewmadmax_CMSB___ 2WD____14.590 @ 94.08 mph
6. wballen.79___????_____???_____14.6 @ 94 mph
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

Top 20 2007-2008 5.7l Tundra 1/8 mile times.

1. sfz989________RCSB____2WD_____8.986 @ 79.24 mph
2. mral1515______RCSB____4WD____9.10 @ 78 mph
3. SR5NEWBIE____DCSB____2WD____9.142 @ 75.28 mph
4. Crewmadmax___CMSB___2WD____9.385 @ 75.14 mph
5
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

GameOver · #19 (**permalink**) 05-29-2008, 02:33 PM

Quote:

Originally Posted by sfz989

Good idea, go ahead and put me down for 13.924 @ 98.8mph
Time slip attached and video in sig

Quick ? for ya, Do you run in Drive or manual mode? Also do you turn the nannies off such as traction control and VSC?

sfz989 · #20 (**permalink**) 05-29-2008, 07:50 PM

Quote:

Originally Posted by GameOver

Quick ? for ya, Do you run in Drive or manual mode? Also do you turn the nannies off such as traction control and VSC?

I just leave it in drive and turn all the nannies off. Try to avoid the water pit and spin just enough to the the tires a lil sticky.

HotWheelsUMD · #21 (**permalink**) 06-12-2008, 10:36 AM

Well, it's not a drag time, but I was messing around last night with my buddy's speed computer. I did two solid 0-60 runs and one where someone merged in front of me and I had to let up. The two good runs both came out to 6.15 seconds. Not too shabby for a DC with a passenger too. The botched run was 7.24 seconds.

TheBlueDemon · #22 (**permalink**) 06-21-2008, 02:05 AM

ahhhh! the demon has finally got a few passes in!
HUNTSVILLE DRAGWAY HARVEST, AL.

dial in........... .00
reaction........ .6160
60'............... 2.1468
330'............. 6.1713
1/8 ET ......... 9.4804
1/8 MPH........ 74.07

Yeah, i know. i was a lil sleep at the light! but hey tonight, i was the fastest stock truck at the track!!!

J314 · #23 (**permalink**) 06-29-2008, 08:31 PM

fine every one wants a s/c 1/4 mile time i think its very poor for the money

reaction .2179
60 ft 2.0891
1/8 et 8.8990
1/8 mph 80.51
1000' et 11.5260
1/4 et 13.7641
1/4 mph 100.69

08 dc 5.7L 4x4 6.6' bed

mods
trd s/c, trd duels, toyota nurf bars, truck covers usa rolling aluminum cover i listed the cover due to the 160 lbs of extra weight it added
and not counting the s/c added about 75lbs
i will weighing my truck soon
and going to unichip for a proper tuning july 7 hopefully

beboff · #24 (**permalink**) 06-30-2008, 10:23 AM

Quote:

Originally Posted by J314

fine every one wants a s/c 1/4 mile time i think its very poor for the money

reaction .2179
60 ft 2.0891
1/8 et 8.8990
1/8 mph 80.51
1000' et 11.5260
1/4 et 13.7641
1/4 mph 100.69

08 dc 5.7L 4x4 6.6' bed

mods
trd s/c, trd duels, toyota nurf bars, truck covers usa rolling aluminum cover i listed the cover due to the 160 lbs of extra weight it added
and not counting the s/c added about 75lbs
i will weighing my truck soon
and going to unichip for a proper tuning july 7 hopefully

Sounds good to me with extra weight and a 4x4.

07rcsb5.7 · #25 (**permalink**) 06-30-2008, 10:30 AM

Quote:

Originally Posted by J314

fine every one wants a s/c 1/4 mile time i think its very poor for the money

reaction .2179
60 ft 2.0891
1/8 et 8.8990
1/8 mph 80.51
1000' et 11.5260
1/4 et 13.7641
1/4 mph 100.69

08 dc 5.7L 4x4 6.6' bed

mods
trd s/c, trd duels, toyota nurf bars, truck covers usa rolling aluminum cover i listed the cover due to the 160 lbs of extra weight it added
and not counting the s/c added about 75lbs
i will weighing my truck soon
and going to unichip for a proper tuning july 7 hopefully

Looks pretty good remember it is the summer will get much better in the winter. My stock 2002 z28 ran a best 13.6. That was fast. That is cooking for a 4 wheel drive truck

sfz989 · #26 (**permalink**) 06-30-2008, 11:16 AM

That's about 8/10ths faster than most stock double cabs. Did you get a decent launch?

J314 · #27 (**permalink**) 06-30-2008, 01:17 PM

Yes
Very Little To No Wheel Spin
All Nanys Off Brake On And Gas About 2500 Rpms
Just Enough Not To Push The Truck Through The Lights
It May Not Be So Good In The 1/4 Yet
But Great In A Tracktor Pull Won First Place

porsche2nr · #28 (**permalink**) 06-30-2008, 02:47 PM

07 DC with 22in TRD rims. no mods. nannies off.. tow haul on... hobbs motorsport parkway in new mexico.. i think the elevation is around 4000 feet...

16.017 @86.1 mph 1/4 mile

.67 reaction
2.4 60ft
10.3 1/8th mile

Sigman · #29 (**permalink**) 06-30-2008, 03:59 PM

Wow 6k to go .4's faster than my near stock RCSB

What did it do before the SC?

saki302 · #30 (**permalink**) 07-01-2008, 04:49 PM

Remember, the 4X4 DC/Crew is much heavier than our RCSBs. If it will beat a stock RCSB by .4, it's quick!!

-Dave