I Have A 07 5.7 On The Bottle. 100 Shot. And A Volant Cold Air Intake.
Works And Kicks *** Beautifuly.
So Far Im The First That I Know That Has Sprayed The 07. Ive Heard Of Another Guy Hookin It All Up Bad Has Yet To Spray It.
Id Do It If I Were You, I Love It! I Run Low 13's Now.
They had a program on TRUCKS one time that had a switch installed on the gas pedal so that it only gave the shot when in full throtle. They said this was to insure the engine was at full intake so as not to loadup the manifold. This was a sure way not to do the wrong thing. Hitting the button on a unloaded run and above 3000 rpm. I don't know what this timing does but it is very important to get it right. My dads friend once put straight oxygen to his 69' roadrunner and it welded the piston to the bolck. He said it almost took their heads off for the first 3 seconds, then felt like the car was put in park.
i have dyno sheets but apparently the dyno that i use is about 8-10% off but i put down 390 hp, 410 tq. so if its 10% off i should be at like, 429 hp and 451 tourqe. ill figure out how to post pics and ill post up the dyno sheet and pics of the truck and nitrous install.
i have dyno sheets but apparently the dyno that i use is about 8-10% off but i put down 390 hp, 410 tq. so if its 10% off i should be at like, 429 hp and 451 tourqe. ill figure out how to post pics and ill post up the dyno sheet and pics of the truck and nitrous install.
I Have A 07 5.7 On The Bottle. 100 Shot. And A Volant Cold Air Intake.
Works And Kicks *** Beautifuly.
So Far Im The First That I Know That Has Sprayed The 07. Ive Heard Of Another Guy Hookin It All Up Bad Has Yet To Spray It.
Id Do It If I Were You, I Love It! I Run Low 13's Now.
Are you running a wet kit or dry? 2x4 or 4x4 Thanks
__________________
07 5.7 Tundra RCSB 4x4
14.29 @ 96 in stock trim
and no glitches with the torque management between shifts I am assuming? Are you running any kind of electroninc throttle position activation switch or rpm switch. Sorry for all the questions. I have nitrous on 3 of the 5 cars I have and it would be on the Tundra too if had the time to reseach a few more things. What time I have had I have been working on a turbo kit for it.
__________________
07 5.7 Tundra RCSB 4x4
14.29 @ 96 in stock trim
and no glitches with the torque management between shifts I am assuming? Are you running any kind of electroninc throttle position activation switch or rpm switch. Sorry for all the questions. I have nitrous on 3 of the 5 cars I have and it would be on the Tundra too if had the time to reseach a few more things. What time I have had I have been working on a turbo kit for it.
Been running a 200 hp shot on a Chevy 350 (5.7) with stock rods and crank for over 12 years. The switch only works at wide open throttle. I don't use it a lot but still no problems! The Tundra with forged pieces should stand up to an occasional 100 hp shot just fine.
I Just Have It Wired Thru A Wot Switch.
I Want To Get A Window Switch But Havent Had The Money I Bought A **** Car For Gas Milage So The Tundra Is Sitting. :/
i have dyno sheets but apparently the dyno that i use is about 8-10% off but i put down 390 hp, 410 tq. so if its 10% off i should be at like, 429 hp and 451 tourqe. ill figure out how to post pics and ill post up the dyno sheet and pics of the truck and nitrous install.
I Have A 07 5.7 On The Bottle. 100 Shot. And A Volant Cold Air Intake.
Works And Kicks *** Beautifuly.
So Far Im The First That I Know That Has Sprayed The 07. Ive Heard Of Another Guy Hookin It All Up Bad Has Yet To Spray It.
Id Do It If I Were You, I Love It! I Run Low 13's Now.
2007 Tundra 5.7 DBL Cab 4x4 LTD, Radiant Red, Options:
FE, CK, AL, MG, NV, CF, BL, RB. Best ET 2007: Record Run Et For Dbl Cab 14.412 @ 93.58 MPH & 60 Ft Et Record For Dbl Cab and RCSB @ 2.082, R/T .016, 330ft 5.979 & 1/8 Mile 9.227 @ 75.24 MPH. 100% Stock No Mods. At New England Dragway, Epping, NH On A Porta Tree Timing System. Picture & Time Slips Posted At. http://www.dragtimes.com/Toyota-Tund...lip-13779.html
1999 Suzuki Hayabusa GSXR 1300, Stock Motor,Pipes, & Swing Arm. Best ET 1/4 Mile 9.559 @ 143.23 MPH, 60Ft 1.529, 1/8 Mile ET 6.161 @ 116.86 MPH
Picture & Time Slips Posted At. http://www.dragtimes.com/Suzuki-Haya...lip-13818.html ISR Legal Stocker,2003 Arctic Cat F7 Twin: 1/8 mile 6.392 @ 98.4 MPH 60Ft 1.302 Driver Jenny.... "Jenny Jet" http://www.dragtimes.com/Arctic%20Ca...lip-13819.html
Stock 08 Ford Shelby GT 500, Vista Blue. New Personal Best ET 12.200 @ 115.22 MPH At New England Dragway. Time Slip At Link Below. Working on getting into the high 11's before any engine mod's!!! http://www.dragtimes.com/Ford-Mustan...lip-15418.html
Well, it's been a long few months. I'm another one who has Nitrous installed on my RCSB 2WD. I have insisted on only using it with a window switch. The window switch was a bad switch, so I've spent the past 3 weeks waiting to get a new window switch. My original window switch was a MSD switch, but I was having trouble with it. It would activate the N20 when coming on into the RPM band; however, when it shifted from 1st to 2nd, the RPM's were already in the 'window' and N20 would shut down because it didn't come 'up and through' the RPM window. So MSD said it was a faulty switch. I took that one off and ordered one from ZEX and it came in last week. The truck should be done tommorrow, and I'll get it to the track HOPEFULLY this week to make some passes on it.
Well, it's been a long few months. I'm another one who has Nitrous installed on my RCSB 2WD. I have insisted on only using it with a window switch. The window switch was a bad switch, so I've spent the past 3 weeks waiting to get a new window switch. My original window switch was a MSD switch, but I was having trouble with it. It would activate the N20 when coming on into the RPM band; however, when it shifted from 1st to 2nd, the RPM's were already in the 'window' and N20 would shut down because it didn't come 'up and through' the RPM window. So MSD said it was a faulty switch. I took that one off and ordered one from ZEX and it came in last week. The truck should be done tommorrow, and I'll get it to the track HOPEFULLY this week to make some passes on it.
Re: Nitrous Spray
Linear Mode
