Nitrous Spray

[Austin Aggie]

http://www.tundrasolutions.com/forum...all-w-nitrous/

remotemonkey - look at the link above.

[remotemonkey]

Originally Posted by Austin Aggie

http://www.tundrasolutions.com/forum...all-w-nitrous/

remotemonkey - look at the link above.

any one who likes anything about modification should look at that link, i might have to say thats of the cleanest sexiest best looking trucks on here....damn

[07rcsb5.7]

Has anyone ran there truck with the nitrous installed?

[Cycleman6]

Originally Posted by remotemonkey

any one who likes anything about modification should look at that link, i might have to say thats of the cleanest sexiest best looking trucks on here....damn

Thanks! It's been fun. Soon though I'll have to sell the RCSB, and upgrade to a Crewmax for the family.

[yodaworrior]

do any of yall know if anything is forged in the motor from factory

[thumbster]

Originally Posted by Cycleman6

My original window switch was a MSD switch, but I was having trouble with it. It would activate the N20 when coming on into the RPM band; however, when it shifted from 1st to 2nd, the RPM's were already in the 'window' and N20 would shut down because it didn't come 'up and through' the RPM window.

Ideally you should trigger the nitrous from the TPS at the throttle body and not from the TPS at the pedal. This will give the system a true input of the actual throttle being applied to the engine due to the ECM cutting the throttle between shifts. A window switch used in conjunction with the throttle body TPS reading will make it foolproof. I ran this kind of setup on an older drive-by-wire jetta 1.8t with good results ( aside from grenading the transmission )

[sfz989]

Originally Posted by Cycleman6

Thanks! It's been fun. Soon though I'll have to sell the RCSB, and upgrade to a Crewmax for the family.

Say it aint so!!! But congratz on the family man! At least your staying with the Tundra, just a bigger slower one