TRD tailpipes - Toyota Tundra Forums : Tundra Solutions Forum

chevyota · #1 (**permalink**) 02-08-2009, 12:08 AM

I was just wondering it anyone on here that has the TRD dual exhaust can tell me the size of the tailpipes? I have the banks single outlet, I think i can make the dual pipes fit with a y-pipe and some welding. I went to about three dealers with my dial calipers and there are not many tundras on the lots around here and not one with the dual exhaust.. I figured i could get some help on here thanks

KoolKev · #2 (**permalink**) 03-02-2009, 02:35 PM

Same issue here about the dealerships.

Wacked · #3 (**permalink**) 03-02-2009, 03:22 PM

Shoot Sparks an email, i am sure they will be more than happy to get you the info you are looking for

hickerjl · #4 (**permalink**) 03-02-2009, 06:50 PM

They are 2 1/2 Inch.. THen have a Stainless Tips on the ends, I have the kit that goes from the factory pipes out back, It has the Single dual in/out muffler then the twin out.

rudeelanda · #5 (**permalink**) 03-02-2009, 07:39 PM

Last time I checked I measured the O.D of the pipes at 2 3/4 (2.75") measured with a micrometer. I had to get a gasket, thats why

07White-SR5 · #6 (**permalink**) 03-02-2009, 09:50 PM

What do you want to know, pipe size (before or after muffler) or tip size? Let me know and I can check tomorrow when it's light out.

chevyota · #7 (**permalink**) 04-18-2009, 11:14 PM

i wanted to know the pipe size after the muffler not the tips. My plan is to put the TRD tailpipes on the exhaust i have now with a y-pipe, i saw on sparks that you can just buy the tailpipes and not the whole exhaust
thanks

Quote:

Originally Posted by 07White-SR5

What do you want to know, pipe size (before or after muffler) or tip size? Let me know and I can check tomorrow when it's light out.