305/70/18 on 18x9 wheels +12mm offset??

**sled freak** · 06-26-2012 06:19 AM

Sorry guys, I have searched and searched but have not found a definite answer. Has anybody ran 305/70/18 tires on their Tundra? I have a leveling kit and currently run 285/75/18 Toyo AT's, I am wondering if I can run 305/70/18 with my +12mm Ballistic's??

**wishiwerefishing** · 06-26-2012 08:52 AM

Failed to mention year model and type of leveling kit.

**sled freak** · 06-26-2012 10:56 AM

2008 4x4 with ready lift leveling kit

**wishiwerefishing** · 06-26-2012 12:59 PM

rim and tire questions?

Ps. Lots of quie f s here that are quick to tell you to fly a kite when asking one of the most faq on the forum.

Tire size. Lol But welcome to the forum

**sled freak** · 06-26-2012 03:40 PM

I did search and found nothing, thanks for the reply, but I am still no further ahead. Oh well I guess I will keep searching...

**wishiwerefishing** · 06-27-2012 08:44 AM

Everything I have read so far points to 295/70/18 would be the biggest you could fit . That being said without at least 2.5 to three inches of lift. Is your kit 3/1? May need to do a little trimming still . Offset around 30 to 35. Now keep in mind Im a first gen. And have only acquired this info via ts forums . But since no one jumped in figured I would help with the search.

**wishiwerefishing** · 06-27-2012 08:45 AM

Everything I have read so far points to 295/70/18 would be the biggest you could fit . That with at least 2.5 to three inches of lift Is your kit 3/1? May need to do a little trimming still . Offset around 30 to 35. Now keep in mind Im a first gen. And have only acquired this info via ts forums . But since no one jumped in figured I would help with the search.

**sled freak** · 06-27-2012 06:46 PM

thanks for the replies. I have a 2.5" leveling kit, I think I am going to go with the BFG LT 305/65/18, from what I can find I can swing them on +12mm offset wheels.

**hotracer_05** · 06-27-2012 08:19 PM

from what i have heard on another forum it will fit but you will have to trim some

**IowaChawkeyes** · 07-01-2012 05:59 PM

I have 18x9 ballistics with +14 offset and they're wrapped in 285/75/18 toyo mt's (comes out to 35x11.5) and had to trim the front fender plastic and It rubs pretty good on the body mount in reverse. I have an 07 4x4 with a LRO 3/1. So I doubt that the 305/70 (about 35x12) would fit.