Help! =( Where is the DRL Module for 06-07 Yaris Hatchback?

liveBLUE · #1 (**permalink**) 04-26-2006, 09:45 AM

Hi,

Does anyone know where is the DRL Module located in 06-07 Toyota Yaris Hatchback? I took apart most of the interior part and i still couldn't find it. I hope someone will know and help me out.

Thanks.

mustang67408 · #2 (**permalink**) 04-26-2006, 10:35 AM

Hope this helps.

liveBLUE · #3 (**permalink**) 04-26-2006, 11:01 AM

Thank you so much! I will try and take apart my interior part again and see where it is =)

liveBLUE · #4 (**permalink**) 04-26-2006, 12:02 PM

Do you have any idea how can I access to the DRL? Do I have to take out the whole middle part to get to it? cause I took out the top last night and couldn't see it. maybe it's quite low. I hope someone will give me some directions. thanks!

mustang67408 · #5 (**permalink**) 04-26-2006, 01:29 PM

Quote:

Originally Posted by liveBLUE

Do you have any idea how can I access to the DRL? Do I have to take out the whole middle part to get to it?YES cause I took out the top last night and couldn't see it. maybe it's quite low. I hope someone will give me some directions. thanks!

You have to take the entire upper and lower dash out to get to it.
They dont make these vehicle easy to work on anymore.
Good luck

liveBLUE · #6 (**permalink**) 04-27-2006, 09:52 AM

Thank you so much! I found it last night but I just pull it out cause i don't know which wire to cut. It is right under the steering wheel so you don't have to take out anything, but the space is so small for you to reach. now I have to self mod my HID cause I bought 9006 while my light is H4.

mustang67408 · #7 (**permalink**) 04-27-2006, 10:10 AM

Your welcome and
PLEASE BE CAREFUL!!!! HID's produce 20,000 VOLTS or so.

liveBLUE · #8 (**permalink**) 04-27-2006, 11:16 AM

yeah...i know it's dangerous, and i am taking extra care to it. there's not much mod to do. all I did is bought a cheap halogeon H4, cut the outter ring for locking the blubs to the headlight. then just some metal and make a wrap around the bottom ( not touching the hid) to kill off the glare. that's it. so simple...