2005 Tundra rear axle swap issue
Just changed out my rear axle to find that my e brake cable is too long. Took measurement of width and found to be 2 3/8" shorter than my old axle. Everything bolted right up and works except that I had to put a little extra bend in the brake lines to match up and the e brake cable are too long... and cant adjust out. So now Im sure they gave me different axle from a 05 tundra. It works but how would I know what model this came from so I can get a new e-brake cable to work with? All else works good. I do notice ABS kicks in right at stopping for some reason now. Not sure if load proportioning valve adjustment of rear brakes at moment. Does anyone know the correct check/ adjust for a rear load proportioning valve? Stock 05 Tundra/ 4.7/ 2wd/ ABS/ SR5/ Crewcab.