FS: 4.7L--TRD Supercharger--CNC Machined parts - Toyota Tundra Forums : Tundra Solutions Forum
 6Likes
Reply
 
LinkBack Thread Tools
post #1 of 22 (permalink) Old 09-28-2014, 08:15 PM Thread Starter
Supporter
 
jamesjr4750's Avatar
 
Join Date: Dec 2003
Location: Proudly in the U.S.A
Posts: 1,768
                     
FS: 4.7L--TRD Supercharger--CNC Machined parts

For sale is:
  • Set of 3 critical parts that are most all of the time missing when TRD superchargers are removed.
  • I will not be separating these parts.
  • They are packaged together as they were made... in a batch of 20 each.

The 3 parts are:
  • Upper pulley spacer that mounts the smooth pulley ---Part # Available upon request.
  • Lower pulley spacer that mounts the smooth Dayco pulley ---Part # Available upon request.
  • A/C Bracket mount that mounts the Dayco pulley & spacer for the TRD supercharged specific belt

$115, Plus shipping to place of origin.

*** If you are needing the TRD Coolant housing with the snout brace bracket I have just the right option for you.
Needing TRD 160 thermostats, or any other parts be sure to contact me by Private Messaging. ****

IMG_8005.jpgIMG_8008.jpgIMG_8006.jpgIMG_8007.jpgIMG_7998.jpgIMG_8001.jpgIMG_8002.jpgIMG_7993.jpgIMG_7997.jpg

2003 Toyota Tundra V-8 Access Cab, 4.7L 4x4---(TRD supercharger removed....For Now)
PolyDyn 3000 degree Ceramic Coated---S&S Long Tube Headers w/ High Flow Catalytic Converters, OEM Toyota Gaskets, studs, nuts
S&S Y-pipe, BAMuffler, Volant CAI w/ AMSOIL Ea Air Induction Filter # EaAU3560 & Pre-Filter
305/65/17 BFG KM2 Muds on American Racing ATX: 17" Teflon Coated Aluminum Artillery Wheels
MOTIVE 4.56 gears: Front & Rear Differential/Axle Bearings: KOYO bearings: Cryo'd, REM polished/Microblue Racing Coated
Front IFS/Diff: ARB RD90 Locker, ORS Manual hub conversion, Fully Re-Inforced/Gusseted Spindle
Donahoe Racing Coilovers (cranked 2.5")
Total Chaos Upper Control Arms With TC Nylatron Bushing upgrade, Poly Rack Bushings.
Rear Diff: ARB RD129 Locker, ICON 2.5"--- 11" travel piggyback resevoir Rear shocks w/ Deaver G57 10 pack rear springs, Custom U-Bolt Flip Conversion
Custom 3" Body Lift: Upgraded Grade 8 / F911 1/2" bolts, DayStar Poly Cab Mount Kit
Custom extended Steering Shaft for 3" BL
Custom Fitted ARB Sahara Bumper for 3" body Lift with Fog Light Kit and HID converted KC SlimLites in Front and WARN 9.5XP winch.
All 3: Skid-Row Skid-plates
Stoptech ST-40 4 piston Calipers
---1 Piece: 340mm x 32mm Sport Rotors, Stoptech Street Performance brake pads

Last edited by jamesjr4750; 02-13-2016 at 11:25 PM.
jamesjr4750 is offline  
Sponsored Links
Advertisement
 
post #2 of 22 (permalink) Old 11-26-2014, 08:35 AM
Veteran Member
 
escondidotundra's Avatar
 
Join Date: Jan 2008
Location: san diego, ca
Posts: 1,274
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

Holy $hit James, U R the man!!

This is awesome!!

I like to build BAmufflers


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
escondidotundra is offline  
post #3 of 22 (permalink) Old 11-26-2014, 08:49 AM Thread Starter
Supporter
 
jamesjr4750's Avatar
 
Join Date: Dec 2003
Location: Proudly in the U.S.A
Posts: 1,768
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

Quote:
Originally Posted by escondidotundra View Post
Holy $hit James, U R the man!!

This is awesome!!
Someone needed to work to get these spare parts made.
Over the last 5 years I've seen so many kits that were missing parts.
Many more to this day are missing the idler pulley spacers and the A/C bracket. For some crazy reason people leave the parts on the engine.

Plus... I now have 2 spare TRD superchargers that can use these as well.
Buddy has a spare Supercharger that needed all 3 parts
There is also a modified/CNC machined to fit OEM coolant housing that can be used when there isn't an original TRD coolant housing available.

Last on the agenda is to get another members' TRD supercharged engine tuned so I can provide the Unichip maps as a base map for other people tuning.
jamesjr4750 is offline  
 
post #4 of 22 (permalink) Old 11-26-2014, 09:46 PM
Veteran Member
 
escondidotundra's Avatar
 
Join Date: Jan 2008
Location: san diego, ca
Posts: 1,274
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

the price is amazing at only 20 of each made. This is awesome for the Tundra world!!
jamesjr4750 likes this.

I like to build BAmufflers


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
escondidotundra is offline  
post #5 of 22 (permalink) Old 11-27-2014, 07:55 AM
Supporter
 
jbtoy's Avatar
 
Join Date: Apr 2001
Location: MA
Posts: 2,269
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

Quote:
Originally Posted by jamesjr4750 View Post
Someone needed to work to get these spare parts made.
Over the last 5 years I've seen so many kits that were missing parts.
Many more to this day are missing the idler pulley spacers and the A/C bracket. For some crazy reason people leave the parts on the engine.

There is also a modified/CNC machined to fit OEM coolant housing that can be used when there isn't an original TRD coolant housing available.
Very nice quality work my friend. Nice to know there is now an option to get some of these parts available.

JB

2000 Tundra Supercharged 4.7 TRD (Ivan) in Sunfire Red Pearl.

Long mod list......
jbtoy is offline  
post #6 of 22 (permalink) Old 12-10-2014, 02:14 PM
Lurking Member
 
Join Date: Dec 2012
Location: Home
Posts: 25
 
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

PM sent!!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Coming soon- Supercharger & Multi mode T-case
YotaOFFroad27 is offline  
post #7 of 22 (permalink) Old 03-10-2015, 08:18 PM
Rookie
 
Join Date: Mar 2015
Location: phoenix, az
Posts: 0
 
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

I bought these parts from jamesjr4750. He sent the parts very quickly. The parts are of top notch quality. He is very knowledgeable, friendly and a huge supporter for the 4.7 supercharger.
azcamber is offline  
post #8 of 22 (permalink) Old 08-04-2015, 07:44 PM Thread Starter
Supporter
 
jamesjr4750's Avatar
 
Join Date: Dec 2003
Location: Proudly in the U.S.A
Posts: 1,768
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

A lot of 4.7L TRD superchargers went up for sale in the last couple months. A Lot of "kits" were missing parts.
Here is where you can get these parts. 18 sets are remaining.

Needing the Upper or Lower Dayco pulley, contact me for the part #
Needing the coolant housing or Snout Brace Bracket for the supercharger snout, I got that covered too.

2003 Toyota Tundra V-8 Access Cab, 4.7L 4x4---(TRD supercharger removed....For Now)
PolyDyn 3000 degree Ceramic Coated---S&S Long Tube Headers w/ High Flow Catalytic Converters, OEM Toyota Gaskets, studs, nuts
S&S Y-pipe, BAMuffler, Volant CAI w/ AMSOIL Ea Air Induction Filter # EaAU3560 & Pre-Filter
305/65/17 BFG KM2 Muds on American Racing ATX: 17" Teflon Coated Aluminum Artillery Wheels
MOTIVE 4.56 gears: Front & Rear Differential/Axle Bearings: KOYO bearings: Cryo'd, REM polished/Microblue Racing Coated
Front IFS/Diff: ARB RD90 Locker, ORS Manual hub conversion, Fully Re-Inforced/Gusseted Spindle
Donahoe Racing Coilovers (cranked 2.5")
Total Chaos Upper Control Arms With TC Nylatron Bushing upgrade, Poly Rack Bushings.
Rear Diff: ARB RD129 Locker, ICON 2.5"--- 11" travel piggyback resevoir Rear shocks w/ Deaver G57 10 pack rear springs, Custom U-Bolt Flip Conversion
Custom 3" Body Lift: Upgraded Grade 8 / F911 1/2" bolts, DayStar Poly Cab Mount Kit
Custom extended Steering Shaft for 3" BL
Custom Fitted ARB Sahara Bumper for 3" body Lift with Fog Light Kit and HID converted KC SlimLites in Front and WARN 9.5XP winch.
All 3: Skid-Row Skid-plates
Stoptech ST-40 4 piston Calipers
---1 Piece: 340mm x 32mm Sport Rotors, Stoptech Street Performance brake pads
jamesjr4750 is offline  
post #9 of 22 (permalink) Old 09-23-2015, 08:24 PM Thread Starter
Supporter
 
jamesjr4750's Avatar
 
Join Date: Dec 2003
Location: Proudly in the U.S.A
Posts: 1,768
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

13 sets remaining.
jamesjr4750 is offline  
post #10 of 22 (permalink) Old 09-23-2015, 08:28 PM Thread Starter
Supporter
 
jamesjr4750's Avatar
 
Join Date: Dec 2003
Location: Proudly in the U.S.A
Posts: 1,768
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

Subscribe to this thread for updates.

More CNC machined 4.7L TRD supercharger vital missing parts coming.

If you're needing other items that go MISSING on the Supercharger for the 4.7L Such as:
The TRD Coolant housing
The snout brace bracket
A Double banjo bolt for the Auxiliary injector(s) fuel rail
TRD supercharger Bypass Actuator mount & spacers
..Or the TRD fuel lines itself.

2003 Toyota Tundra V-8 Access Cab, 4.7L 4x4---(TRD supercharger removed....For Now)
PolyDyn 3000 degree Ceramic Coated---S&S Long Tube Headers w/ High Flow Catalytic Converters, OEM Toyota Gaskets, studs, nuts
S&S Y-pipe, BAMuffler, Volant CAI w/ AMSOIL Ea Air Induction Filter # EaAU3560 & Pre-Filter
305/65/17 BFG KM2 Muds on American Racing ATX: 17" Teflon Coated Aluminum Artillery Wheels
MOTIVE 4.56 gears: Front & Rear Differential/Axle Bearings: KOYO bearings: Cryo'd, REM polished/Microblue Racing Coated
Front IFS/Diff: ARB RD90 Locker, ORS Manual hub conversion, Fully Re-Inforced/Gusseted Spindle
Donahoe Racing Coilovers (cranked 2.5")
Total Chaos Upper Control Arms With TC Nylatron Bushing upgrade, Poly Rack Bushings.
Rear Diff: ARB RD129 Locker, ICON 2.5"--- 11" travel piggyback resevoir Rear shocks w/ Deaver G57 10 pack rear springs, Custom U-Bolt Flip Conversion
Custom 3" Body Lift: Upgraded Grade 8 / F911 1/2" bolts, DayStar Poly Cab Mount Kit
Custom extended Steering Shaft for 3" BL
Custom Fitted ARB Sahara Bumper for 3" body Lift with Fog Light Kit and HID converted KC SlimLites in Front and WARN 9.5XP winch.
All 3: Skid-Row Skid-plates
Stoptech ST-40 4 piston Calipers
---1 Piece: 340mm x 32mm Sport Rotors, Stoptech Street Performance brake pads
jamesjr4750 is offline  
post #11 of 22 (permalink) Old 12-12-2015, 01:45 PM Thread Starter
Supporter
 
jamesjr4750's Avatar
 
Join Date: Dec 2003
Location: Proudly in the U.S.A
Posts: 1,768
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

11 sets remaining.
jamesjr4750 is offline  
post #12 of 22 (permalink) Old 12-21-2015, 11:34 PM Thread Starter
Supporter
 
jamesjr4750's Avatar
 
Join Date: Dec 2003
Location: Proudly in the U.S.A
Posts: 1,768
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

10 sets remaining.
jamesjr4750 is offline  
post #13 of 22 (permalink) Old 02-13-2016, 11:26 PM Thread Starter
Supporter
 
jamesjr4750's Avatar
 
Join Date: Dec 2003
Location: Proudly in the U.S.A
Posts: 1,768
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

8 Sets Remaining
escondidotundra likes this.

2003 Toyota Tundra V-8 Access Cab, 4.7L 4x4---(TRD supercharger removed....For Now)
PolyDyn 3000 degree Ceramic Coated---S&S Long Tube Headers w/ High Flow Catalytic Converters, OEM Toyota Gaskets, studs, nuts
S&S Y-pipe, BAMuffler, Volant CAI w/ AMSOIL Ea Air Induction Filter # EaAU3560 & Pre-Filter
305/65/17 BFG KM2 Muds on American Racing ATX: 17" Teflon Coated Aluminum Artillery Wheels
MOTIVE 4.56 gears: Front & Rear Differential/Axle Bearings: KOYO bearings: Cryo'd, REM polished/Microblue Racing Coated
Front IFS/Diff: ARB RD90 Locker, ORS Manual hub conversion, Fully Re-Inforced/Gusseted Spindle
Donahoe Racing Coilovers (cranked 2.5")
Total Chaos Upper Control Arms With TC Nylatron Bushing upgrade, Poly Rack Bushings.
Rear Diff: ARB RD129 Locker, ICON 2.5"--- 11" travel piggyback resevoir Rear shocks w/ Deaver G57 10 pack rear springs, Custom U-Bolt Flip Conversion
Custom 3" Body Lift: Upgraded Grade 8 / F911 1/2" bolts, DayStar Poly Cab Mount Kit
Custom extended Steering Shaft for 3" BL
Custom Fitted ARB Sahara Bumper for 3" body Lift with Fog Light Kit and HID converted KC SlimLites in Front and WARN 9.5XP winch.
All 3: Skid-Row Skid-plates
Stoptech ST-40 4 piston Calipers
---1 Piece: 340mm x 32mm Sport Rotors, Stoptech Street Performance brake pads
jamesjr4750 is offline  
post #14 of 22 (permalink) Old 02-17-2016, 08:53 PM
Veteran Member
 
escondidotundra's Avatar
 
Join Date: Jan 2008
Location: san diego, ca
Posts: 1,274
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

Hey James. I have a customer lookin for a set if these. How quick can ya get em to San Diego?

I like to build BAmufflers


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
escondidotundra is offline  
post #15 of 22 (permalink) Old 02-18-2016, 02:14 AM Thread Starter
Supporter
 
jamesjr4750's Avatar
 
Join Date: Dec 2003
Location: Proudly in the U.S.A
Posts: 1,768
                     
Re: FS: 4.7L--TRD Supercharger--CNC Machined parts

PM' Sent
escondidotundra likes this.
jamesjr4750 is offline  
Sponsored Links
Advertisement
 
Reply

Tags
4.7 supercharger , 4.7l trd supercharger , trd supercharger , tundra supercharger , tundra supercharger parts

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Toyota Tundra Forums : Tundra Solutions Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome