Toyota Tundra Forums : Tundra Solutions Forum - View Profile: hewitt-tech
                     

hewitt-tech hewitt-tech is offline

Veteran Member

  Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. Armystrong
    02-26-2018 08:17 PM - permalink
    Armystrong
    I have read a lot on AIPs and back in 2008 when I started buying Tundras then sold them I stopped worrying about AIPs. Mendosy, SteveJ, and a couple others did a ton of R&D. So much SteveJ came out with a DIY 1.1 AIP instructions. Now that I own a 2011 Tundra DC 4.6 I now hate the dreaded loud pump noise in the morning and don't look forward to any possible failures.

    With that said, I am aware you have made a kit. So here are my questions:
    1. To get rid of the AIP loud noise can I just do the 1.1 AIP Bypass with a relay and resistor? .....if so do I have to block off the AIPs?
    2. My truck is a 2011 with 38,000 miles...with no issues at all, would it harm anything to install a Bypass without block off plates?
    3. In considering your kit, besides the price difference between buying a Relay with 87A terminal, a 4.7K ohm resistor and some wire, what would your kit enable/disable that the relay and resistor "DIY 1.1 Bypass" would/wouldn't do?

    Thanks a million
    Jim
  2. hewitt-tech
    01-23-2017 02:17 PM - permalink
    hewitt-tech
    Hey Guys,
    Glad you stopped by. If you have questions about or products or even any ideas for simple electronic products for our vehicles let us know.
    Reaching us by phone or email is always the most reliable.
    [email protected] for any general questions about our products Toll Free 844-307-7671
    Check out our website for our products www.hewitt-tech.com
  3. bdh5574
    05-03-2016 12:47 PM - permalink
    bdh5574
    mendonsy suggested I look at your Air Induction Pump Bypass Module - AIP Valve Bypass. I looked at your site and it looks like they're all for 2005-2007 models.

    Mine is a 2008 Tundra with the 4.0 V6.

    Do you have a kit for my truck?

    Thanks, Bob

  About Me

  • About hewitt-tech
    Biography
    Paul Hewitt is the current President and CEO of Hewitt Technologies Inc.He has a Bachelors of Scienc
    Location
    SC
    Interests
    Electronic Design, PCB Layout, Motorcycle Road Racing, International Scouts, Fishing
    Occupation
    President and CEO of Hewitt Technologies Inc; Electrical Engineeer
  • Signature
    Home of the Original Secondary Air Injection System Bypass Kits
    Toll Free 1-844-307-7671
    https://Hewitt-Tech.com
    [email protected]

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 05-20-2019 09:59 AM
  • Join Date: 01-07-2009
  • Referrals: 0

  Friends

Showing Friends 1 to 2 of 2

  Mentions

05-20-2019
09:59 AM - hewitt-tech mentioned cheap in post Re: May be time?
...ther things I think cheapkate may be right and...
12-15-2018
11:22 AM - cruiserguy mentioned hewitt-tech in post Re: 2012 Tundra 4.6 with P0418 Code?
pxsp Which kit for engine code p...
06-24-2017
03:42 PM - Vepil mentioned hewitt-tech in post Re: Air Induction Pump Bypass Module - AIP Valve Bypass
pxsp I have a 2007 5.7 and h...
12-15-2016
11:56 AM - hewitt-tech mentioned lonesouth in post Re: Gen 1 to Current
... have to agree with lonesouth, the body is HUGE bu...
10-19-2016
06:36 PM - Jade mentioned hewitt-tech in post Re: Air Induction Pump Bypass Module - AIP Valve Bypass
Ordered my upgrade to V50. It'll...

  Quotes

05-01-2019
08:08 AM - hewitt-tech quoted asc08 in post Re: A/C Pressure Relief Valve?
...is most likely what ASC08 said though. You pro...
04-09-2019
08:07 AM - wakeboardjoe quoted hewitt-tech in post 2013 Tundra P2441 Error
BIG WIN. Thank you all ! T...
04-06-2019
05:52 AM - hewitt-tech quoted dnull in post Re: Need help ,How to fix P0031, P0051 ( VSC TRAC, TRAC OFF with check engine light)
My 03 does the same thing....
05:49 AM - hewitt-tech quoted spitfyr12 in post Re: 08 Tundra 5.7, code P1613 & limp mode?
Have sourced a replacement par...
04-02-2019
06:20 AM - hewitt-tech quoted Caboose in post Re: Sunroof leak
Compressed air from a compre...
01-30-2019
06:16 AM - hewitt-tech quoted DennisGoulden in post Re: '03 Tundra 4.7--No crank no start...Why?
It is actually the 2nd new starter...
01-29-2019
08:48 AM - hewitt-tech quoted ckellogg17 in post Re: Air Induction Pump Bypass Module - AIP Valve Bypass
I have a 2014 tundra rclb with ...
01-10-2019
11:56 AM - hewitt-tech quoted seachunk2 in post Re: No Rear Window Defogger???
Thanks pxsp. Just to be sure I...
11-01-2018
06:02 AM - hewitt-tech quoted 8ftbed in post Re: Air Induction Pump Bypass Module - AIP Valve Bypass
So, I replaced the two upst...
10-19-2018
07:04 AM - AR15tn quoted hewitt-tech in post Re: Sequoia - crank, will only start with starter fluid in the intake
Sounds like what people were say...
06:14 AM - hewitt-tech quoted 8ftbed in post Re: Air Induction Pump Bypass Module - AIP Valve Bypass
I don't do forums (anymore)...
10-13-2018
03:13 PM - MisterB2 quoted hewitt-tech in post Re: AIP limp mode,etc.
You are pretty lucky. You are in...
09-20-2018
10:36 AM - ejwisdom quoted hewitt-tech in post Re: blower problems
On yours, usually only a couple ...
09-18-2018
06:31 PM - Pas Bon quoted hewitt-tech in post Re: Tundra "spongy" brakes
Look up at my first post. Part o...
03:34 PM - Pas Bon quoted hewitt-tech in post Re: Brake Bleeding, ABS- Actuator-Techstream HELP!!
Not really the same as the other...
10:18 AM - h7009 quoted hewitt-tech in post Re: Tundra "spongy" brakes
pxsp, Yep he/we looked at that ...
10:10 AM - hewitt-tech quoted H2O_MAN in post Re: Starting issue
Have the dealer cut you a ne...
09-17-2018
08:07 AM - h7009 quoted hewitt-tech in post Re: Tundra "spongy" brakes
pxsp, you are more than likely ...
06:35 AM - hewitt-tech quoted h7009 in post Re: Tundra "spongy" brakes
Oh and yes, we even did th...
09-10-2018
06:56 AM - hewitt-tech quoted EpyonXero in post Re: P2442/Secondary Air
I have a 2011 Tundra and I jus...
 
For the best viewing experience please update your browser to Google Chrome