The next day after purchase, I put the Borlas on. Had to wait a week before the Blower and Fender Flares to come in and to be installed. I then started adding LED's to the Wheels, then started on the door panels and outside door latches. Its best to do these at the same time. I used one relay for the outside LED's and one for the inside LED's. I used one for the Engine compartment, and the last one for the front of vehicle. After I did the doors, I did the tailgate, and ordered a chrome tailgate latch off of eBay. I added 2 single LED's in it, wired them together, before installing the latch. I tied the circuit into the tailgate wiring. I used a small drill to make holes for the wire ties in the engine compartment cover under the wipers so the LED strip would stay in place. I bought the rear sway bar and installed it myself as well. I bought the bed cover and carpeted bed liner which they installed. I then added LED's around the lip. I also bought LED's for the fog lamps from eBay and installed them. I then added LED's under the dash and under the seats.
2013 Toyota Tundra (White)
TRD Blower, TRD Air Intake, LED lights, LED Relay mount
LED's in the door pulls, door pockets, under dash, and under all seats.
Fender Flares, blue LED's in wheels, under tailgate, in door handles, under bed cover, in tailgate latch, on fog lights.
Just the stock JVC syestem with back up camera
Wheel and Tire