Toyota Tundra Forums banner

1st gen tundra

  1. 1Gen-Tundra
    I am about to replace the engine and wondering if anyone recommends replacing any other parts while the area is empty. Will definitely do the motor mounts. But nothing else planned. Anything in the transmission? the story if you want it... I recently had the timing belt tensioner blow on my 03...
  2. Suspension, Axles, Brakes
    I have a 2005 Toyota Tundra Double cab 2wd. I took the rear driver side axle out to get the wheel bearing pressed out and new one in. The machine shop told me that the wheel bearing spun onto the shaft. Now I will need to buy a new rear axle shaft. I'm not able to find it anywhere for a 2005...
  3. 1Gen-Tundra
    Hey guys, new tundra owner here. I got an 04 Tundra Access Cab LTD with only 98k miles from a family member for nothing. It was very well maintained judging by the tons of service receipts I got with it, so I’m hoping it can last me a while. It just has some cosmetic issues with the paint and...
  4. 1Gen-Tundra
    Hi, I'm hoping to get some help with my 04 Tundra DC. It gets driven in 4wd pretty regularly at our lease property. Last week when I got home and parked it, all seemed well. Then the next day I got in and went to back out and it made a clicking/grinding noise. Almost like a bike would make...
  5. 1Gen-Tundra
    I'm ready to let go of my T3, original owner. Anyone know what the current value for one of these is now a days? Truck has 107,000 miles, black exterior, located in Texas. At the time I purchased the truck, I didn't like the 17" wheels that came with it and had the dealer swap for these 16"...
  6. 1Gen-Audio & Electronics
    I have a 2001 tundra, and I've been trying to add a keyless entry system(avital 3100L). This has been going very poorly. Whenever I connect the "- Lock, +unlock" to the green/white connector in the driver side kick panel, it locks the doors and won't unlock. My power and ground are fine, I...
  7. 1Gen-Tundra
    I'm pretty new to this site, love it so far. I've tried looking it up on different sites as well as this one but haven't come across an answer as of yet. I have a 2004 Tundra double cab SR5, and in the past I've had trouble getting parts for the front end (e.g had a hit and run on my front left...
  8. Gen1 Tundra Parts Classifieds - (2000-2006)
    2006 Tundra Front Bumper Complete - Used Includes bumper cover, support bars, lights, hardware, flares. Take off from my truck when I put an offroad bumper on it. This is straight from an accident free truck. Includes associated mounting hardware, support braces, foam and so forth Includes...
  9. Engine, Intake, Exhaust, Induction
    I've now lost two alternators on the highway at fast speeds. The first one was easy... the valve covers desperately needed new gaskets and to be tightened. Fixed. Good to go. But now I'm 9 months later and in the middle of a high speed long drive I lost another alternator to oil. I never really...
  10. 1Gen-Tundra
    I know I will probably be hated by a majority of truck owners for even creating this thread but i was curious i i just got some new BFGoodrich 285 75 r16 on the stock limited rims they fit almost perfectly in the fenders with the 3" block lift i have but the tires are not flush to the fenders...
  11. T-Case, Driveshaft, Diff, Axle, Hub
    I've got an 00 AC tundra with a snapped axle shaft and bent housing. I am having a hard time sourcing a rear end out of an access cab but there's plenty of rear ends out of DC model. For the life of me I can't seem to find any information if the rear ends are swappable. I know the diffs are...
  12. Vehicle Classifieds
    1st Gen 2000 LTD Access Cab/TRD for Sale, NJ/PA area 2000 Toyota Tundra 4x4 LTD Access Cab $4900.00 For Sale “AS-IS” It has over 200KMiles Selling for less than $6K used market assessment value from Kelly Blue Book.com! I’m the one/original owner, purchased new, clean title, no...
  13. 1Gen-Tundra
    Hey all, so i'm having an issue with my truck starting in cold temps I.E. 0 degrees F or below. Here's what happens: Turn key, all lights come on, fuel pump kicks on, everything normal Turn to start position, engine VERY VERY slowly cranks over, almost as though the battery is dead Turn key...
  14. 1Gen-Tundra
    I have a 2001 Tundra 4.7, 130,000, new timing belt, pulleys, hoses, plugs. Was running great and just died while driving. Had it towed home, rented a fuel pressure gage, no pressure when ignition on or cranking. Replaced filter and fuel pump but haven't rechecked fuel pressure. Engine either...
  15. 1Gen-Tundra
    I'd really like to get a SwingCase pork chop style toolbox. It looks perfect for storing tie downs, tools, tow straps etc. It sits right over the fender so you don't lose any bed length which is important to me as I need to fit my motorcycles in the bed. Anyway, has anyone tried installing one...
  16. Gen1 Tundra Parts Classifieds - (2000-2006)
    Selling a pair of king 2.5 coil overs for 1st gen tundra. For 2wd/4wd I believe. I had bought these off a tacomaworld member under the impression that they were for my tacoma Prerunner. Just took them to king earlier this week and had them replace everything that I'd need to get mounted up...
  17. Gen1 Tundra Parts Classifieds - (2000-2006)
    Selling some ICON coilovers that I had on my 2003 Tundra. Sold the Tundra. I had them on the truck for about 20-25k miles and they were amazing on the dirt and on the streets. Plan to get some for my new truck also. Sent these to ICON for a full check-up/ maintenance and had them replace both...
  18. Engine, Intake, Exhaust, Induction
    Hey all! First post, but I am preparing to buy a 2003 Tundra AC limited TRD. Can't wait.. but in the mean time I am staring at all things 1st gen tundra TRD.. So, saw this chip and wondering if anyone has used it before? here is link Performance Chip Toyota Tundra V 6 2004 2005 2006 05 06 |...
  19. Lifting
    Hey all I've been a lurker for a while and figured I'd add something to the mix. Just had the Toytec BOSS Complete lift installed and it's pretty sweet. Will post better picture after i get the fender repainted and new ERG flares installed. The original flares i had plasti diped and it...
  20. New Member Introductions
    Hey everyone…this forum is AWESOME!! So much information on here and I can get lost for hours. I bought my 01 Tundra out in CA and brought it out to CO where I am wanting to keep this thing forever! lol I have been doing some research about lower ball joints and wheel bearings/seal: I have come...
Top