Toyota Tundra Forums banner
2000 toyota tundra
1-6 of 6 Results
  1. 1Gen-Tundra
    I started my truck up the other day and the hi and lo lights were flashing on the dash and the buttons were flashing too. I thought maybe I bumped the buttons, so I let it go. later I tried to put it in 4wd and nothing happened so I got on here and looked around, no good answer other than the...
  2. 1Gen-Tundra
    First step was to see if a 10" sub would fit. I thought it would after taking some measurements. Next step was to evaluate the existing storage compartment. I sealed it best I could using Peel & Seal tape from Home Depot. It's not perfect by any means, but it's a first attempt. This acts as a...
  3. 1Gen-Tundra
    I bought my 2000 Tundra off my family for college a year ago and here is my progress from being stock. Family bought it back in 99' Feedback appreciated
  4. 1Gen-Tundra
    Hello, turns out my two middle cylinders are trashed from over heating my truck from an accident and the radiator was leaking, my bad on checking the levels before leaving again. But on to the prob... I'm mechanically inclined, but a little intimidated on doing this engine swap with...
  5. 1Gen-Tundra
    I have a 2000 Tundra SR5 4x4 Access Cab 4.7L V8, no modifications. A year ago I had some work done on my Tundra and discovered that one of my rear axle seals was leaking grease onto my passenger side brake. I had the seals replaced, new pads put on and the drum cleaned. 1 year later took...
  6. 1Gen-Tundra
    I am new to the forums and have trolled this site trying to find info on doing a tune-up on my truck. I have never been great working on cars, but over the years have done more. I have a buddy coming over to help me and it seems straight forward. I would like to read over the procedure and...
1-6 of 6 Results
Top