Toyota Tundra Forums banner

ball joints

  1. 2000 Tundra Ball Joint Failure

    1Gen-Tundra
    Hello all, this is my first post. I have a 2000 Tundra 4wd 4.7 that I bought new and currently has 322,000 miles. Replaced tie rod ends and ball joints last spring for the second time and ran across an unusual problem. Since spring the passenger side ball joints have failed twice, in all cases...

  2. Suspension Question Before I Spend $1000

    1Gen-Tundra
    Hey Guys, First post on here for me. So...I have a 02' Tundra and a few years ago I installed coil spacers that are about 2'". As I have found on the forums that was not the best decision and my ball joints hit the springs and are now toast. I also have 1" blocks in the back so the truck sits...

  3. Tires !?! balljoints!?!

    1Gen-Tundra
    So Im putting either 285's or 305's MTs on my 2005 trd that has a 3" lift. I know already that Im going to have to get wheel spacers to have enough room to fit them on and I know that I can fit the 285's on but my questions are can I fit 305's if I get a wider spacer and my friend whose a...
Top