Toyota Tundra Forums banner
bearing
1-9 of 9 Results
  1. T-Case, Driveshaft, Diff, Axle, Hub
    Hey everybody, I couldn't find anything related to this in the forums so I started a new one: I heard a bumping sort of click coming from my driver side rear wheel for a week and a half and when I finally took the wheel and drum off I saw some shredded metal on the inside end of my axle shaft...
  2. 1Gen-Tundra
    First post here, I have a 2000 LC with a 4.7 engine that is similar to first gen tundra. Curious if anyone here has replaced their fan bracket pulley bearing? Through my research I have found that it is good practice to replace this bearing during a timing belt job. I have found many that have...
  3. Lifting
    I have a 2004 Tundra 4 door (Crewmax) 4x4 with the Tuff Country 5" lift, 18" wheels and Goodyear wrangler dura trac 275/70r18s. I am currently running the stock gearing. I installed this lift about a year and a half ago and had no problems with it until the beginning of this past summer. The...
  4. 1Gen-Sequoia
    I'm the proud owner of a 2005 Sequoia SR5 4x4 and couldn't be happier. I thought there was a problem with the tires or wheel bearings when I bought it but am coming to the conclusion that it's the front differential. From about 35 MPH to 60 MPH there is a very annoying cyclical vibration...
  5. Engine & Drivetrain
    My 2002 4WD LTD with 178k miles has run flawlessly since new. Some minor fixes here and there but definitely the most reliable vehicle I have EVER owned. Since about 174k, I have noticed a faint humming/vibration noise when the drive train is unloaded. I.e. no accelerating or decelerating...
  6. 1Gen-Tundra
    Does the front drive shaft rotate when NOT in four wheel drive? Also, can the front drive shaft be removed and still be able to drive the truck without it? I have a very unique humming noise coming from what I believe is the front end, but it is very random. It has been there off and on for...
  7. 1Gen-Tundra
    Good morning everyone- Would anyone have a pdf or any other instruction on how to remove a wheel bearing (Front) on a 2000 Tundra ? Honestly appreciated !! :) Jon
  8. Avalon
    I have a 1998 Avalon that I bought new. It has about 50k miles and has been well maintained. The only major service has been a timing belt/water pump change about 6 months ago. First, I want to apologize for the length of this posting. Second, I am learning how difficult it can be to...
  9. Tacoma
    Doe anyone know what would cause the front passenger side wheel bearing to repeatedly fail. It has failed 3 times in the past 2 months. I drive a 2000 Tacoma SR5 4x4. It first failed in December 09 when I was driving back home from LA. I made it half way (300+ miles) before I heard grinding...
1-9 of 9 Results
Top