brake light

2006 Tundra DC 4wd with 240k miles on her This is my wife's truck - her pride and joy to drive - so, since I don't drive it every day, I may be missing some information. The truck will start and drive in a normal fashion and these symptoms came on one day, seemingly without warning. The...

hi, tail, parking, license plate and dash lights are not working. brake lights work intermittently, 3rd brake light works all the time. checked all fuses - they look ok. Wassup??? help anyone?

On my 2001 Sequoia Limited 4WD I changed the rear rotors and pads today and now the brake warning light and VCS lights won't go out. :sad3d: On each rear caliper when I installed the pads I removed the caliper from the brake line and when I reattached it after putting the new pads in I bled...

Trying to get some info on where to get replacement break light cover for a 2004 tundra sport. if anyone has a local place to get it in the Houston area or online. Thank you :beatsme:

Remove the two screws holding the tailight cover in place. After you remove the two screws in the back panel, you have to pull the assembly. The best way for me to describe it is, you have to move to the side of the truck and pull the assemble towards you. You cannot pull it straight back in...

Ok, here is the situation.. I was in very VERY deep snow Yesterday. I do have a plow and I did plow a lot yesterday.. BUT I also just DROVE through very deep snow for many miles (5-6 Miles).. 18-22" deep EASILY. Anyways.... I drove about 10 miles on decent road (not much snow)... and my ABS...