Toyota Tundra Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 53 Results
  1. 2Gen-Brakes
    On starting my truck this morning and putting it in reverse I got a moaning sound from the front end when applying the brakes, especially when I applied full pressure. This also happened when moving forward. However, after a short time the moaning disappeared and the brakes functioned...
  2. 2Gen-Brakes
    I'm in the market for new brakes and rotors after only 40k miles on my 2018 Tundra. I was looking at the powerstop Z36 brake kit and there seem to be a lot of mixed reviews on the drilled/slotted rotors. Some say they're great and some say they warp pretty quickly and being that theyre...
  3. 2Gen-Brakes
    2016 Tundra SR-5, 155K miles. My truck has developed a mild front-end sound that hums while driving on a highway. This sound goes away when I lightly press the brake pedal and returns when the pedal is released. This constant hum is affected when I turn in that it gets quieter, but returns when...
  4. 1Gen-Brakes
    Howdy All, Was hoping my first post wouldn't be an issue that needed to be resolved, but here I am... I have an 06 tundra that I recently acquired. 2 days ago i set off to replace a cv axle that had a tear in the boot. Upon jacking the truck up I realized the whole front end needed to be...
  5. 2Gen-Brakes
    Just replaced front brakes, rotors and a caliper on the passenger side. For some reason when I tried bleeding the passenger side new caliper I cannot get fluid to come out of the bleeder. Loosend line going into caliper and have fluid there. When I start the truck there are no brakes, goes right...
  6. 1Gen-Tundra
    As you read, my tundra pulls hard right when I get on the brakes when trying to stop or slow down on an off-ramp. I've done everything I can think of to try and fix it, upper and lower ball joints, tie rod ends, steering bushings, new tires, more than one alignment, and nothing seems to work...
  7. General Classifieds and Miscellaneous Items
    I purchased these PowerStop cross drilled and slotted front rotors and brake pads by accident and the shipping price to return them is too much. I needed them for my 2012 Tundra, but Summit had my old Tundra information stored and defaulted to it... I neglected to check before I ordered them...
  8. General Classifieds and Miscellaneous Items
    I purchased some Powerstop cross drilled and slotted rotors for my 2001 Toyota Tundra by accident. They are brand new in the box locally here in Colorado just outside Denver. They are the trailer and tow package brake pads. Because it was my mistake it would be too expensive to send them back to...
  9. 1Gen-Brakes
    I recently replaced the front axle oil seal and rear left axle oil seal as well as new brake shoes and drums. Soon after my ABS would turn on (no ABS light) when braking at low speeds so I cleaned all 4 wheel speed sensors and found that the front right was covered in old metal filings. After...
  10. 1Gen-Brakes
    So my junk is all worn out. Just past 210k last month, took the truck in to Brakes Plus (yeah, I know...) for a free evaulation cuz the pads were squealing anyways. They found pads are toast, rotors at wear limits, driver front caliper would not retract for new pads, left rear drum seized on...
  11. 1Gen-Member Mods, Build Threads, Write-ups
    I recently bought a 2000 Tundra, xtracab, V8, in forest green. It has 230K miles on it, but I believe it has been well maintained. I'm looking items that should or could be upgraded relatively easily. Two things I have on my radar are to (1) replace the center console with one from a Sequoia...
  12. Gen1 Tundra Parts Classifieds - (2000-2006)
    A while back I ordered a brand new set of Hawk SD brake pads for my Tacoma. I did the Tundra caliper swap but I used late model calipers instead of early. Thus, these do not fit! They are for 2000-2003 Tundra / Sequoia calipers. Unfortunately, I found this out way past my deadline to return...
  13. 1Gen-Tundra
    Hello all. Pretty new here so not sure if this is the place to write this but here it goes anyways. I recently did a bunch of work to my 01 Tundra SR5 (243,XXX miles). Here is a list of everything I did. 1. spark plugs, oil, filter and air filter (NGK Iridium, Castrol full synthetic, K&N oil...
  14. 1Gen-Tundra
    I have a 2001 Tundra 2wd and think I need to replace my rotors. I was living in Phoenix, where the temps get up to 116, and recently moved up to Washington state and noticed that when I break there is a vibration. I looked on Rockauto.com and saw there are many different choices on rotors and...
  15. 2Gen-Brakes
    I am fairly new to this forum so I apologize if I have posted this thread incorrectly. I recently had the dealership replace the rear brakes and rotors and now when I'm cornering an on/off ramp (seems cornering anything above 20-25mph) my ABS goes nuts even when I'm not implementing the...
  16. 1Gen-Sequoia
    I just bought a 2004 Sequoia SR5 with 120k miles.. The brakes felt soft and seem to be better after I pump twice. Since I run a Goodyear store for a living, I replaced the front caliper hardware, installed new rotors on the front, and cleaned and greased the slides on the rear calipers. It now...
  17. 1Gen-Tundra
    Hello board members, I have a problem with my brakes, pedal seems to have more than normal travel in it. Replaced all brakes including rotors, drums, and fluid about 3 months ago. Bled brakes several times thinking there might be air in the lines so that doesn't seem to be the problem. If...
  18. 1Gen-Tundra
    Hey guys, so I've had my 2005 Tundra DC since May, and I've taken it to the Toyota dealership numerous times for this problem. Every so often (and it's not every time) when I'm coming to a stop, right before I quit rolling I'll hear this loud sound coming from my brakes. It's not a shrill or a...
  19. 1Gen-Tundra
    I was doing a brake pad replacement on my 2001 4.7 SR5, and the fronts were worn so I replaced them. Then, I jacked up the rear axle to change the rear shoes and they looked like they've never even made contact with the drum. SO, I left them alone and adjusted them until they were making...
1-19 of 53 Results
Top