Toyota Tundra Forums banner

cv boot mod

  1. T-Case, Driveshaft, Diff, Axle, Hub
    I have a 2006 DC XSP 4x4. I LOVE THIS TRUCK! It came stock with Enkei 20" rims and 295/45R20 tires. Those low profile, H rated tires, make a 4x4 useless. So I added a 2.5" leveling kit and 1.25" wheel spacers and put on 285/55 tires. When I did, the higher angle split the inner boots. I...
  2. 1Gen-Tundra
    Hello everyone, this is my first post here so forgive me if I am doing something wrong. This was performed on a 2002 Toyota Tundra TRD Offroad with 5100 Bilsteins. There is a quite popular inner CV boot mod pertaining to first-gen tundra 4wd trucks and the same model year sequoias. If you have...
  3. Suspension & Axle
    For anyone who hasn't replaced a CV Boot, or had to take out their axles yet, I just replaced a torn boot on my 2004 4x4 Doublecab and made a video of the process. I should've read some of the write ups on here first as I didn't realize there was no need to take off the calipers and brake...
  4. 1Gen-Tundra
    I recently put adjustable 5100's (highest setting) and a diff. drop on my 2006 DC. After about 3 days of driving, I got under the truck to check and see if my CV's were slinging grease. Of course....they were. So I got a set of 4" hose clamps and did the boot mod. No grease slinging since...
  5. 1Gen-Tundra
    i have king coilovers installed how they come from the factory i want to get some more lift and have done the hose clamp mod on the inners. if i have not torn my boots should i change to the 930 boots or see if the clamps will hold up with the extra height? i would rather fix them before i...
Top