Toyota Tundra Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. T-Case, Driveshaft, Diff, Axle, Hub
    So, I wanted to do the chassis lubrication for the first time on my 06 4x4 DC and had a real hard time finding a simple illustration or pictures showing the eight lube points. Many posts that claim to have pictures and or diagrams no longer had the pictures or diagrams they claimed to have in...
  2. 2Gen-Tundra
    2010 Tundra DC SR5 4.6 4x4. Novice mechanic and just started doing my own oil changes, but I'd like to lube the propeller shaft properly. I'm having a hard time finding "Molybdenum disulphide lithium grease." What are you guys using for Lithium grease? More importantly.... What are you using...
  3. Tire, Wheel, and Alignment
    It dawned on me that as I reach 250,000 miles that I have never greased the wheel bearings. I am guessing it might be a good idea to do this? If so what grease and should I replace the wheel bearings? There is no noise, just curious.
  4. 1Gen-Sequoia
    I was under my '03 Sequoia recently changing out the sway bar connector links. While doing that I noticed the CV axle boots spinning out grease onto the frame (see attached pics). So, I have a few questions for all you advanced techs. What does this mean exactly? Is it that the clamps may...
  5. Sequoia
    I've read several other posts about lubing the propeller shafts and grease zerk locations. However, most of those posts were for other years and models that are likely different than my '08 Sequoia LTD 4x4. I've found 4 grease zerks on both ends of both front and rear drive shafts. I have...
  6. 1Gen-Tundra
    I recently put adjustable 5100's (highest setting) and a diff. drop on my 2006 DC. After about 3 days of driving, I got under the truck to check and see if my CV's were slinging grease. Of course....they were. So I got a set of 4" hose clamps and did the boot mod. No grease slinging since...
1-6 of 6 Results
Top