Toyota Tundra Forums banner

install

  1. Suspension, Axles, Brakes
    How are the front suspension LCA rear bushings pressed in? I have a 2004 2WD Limited. Both the front and rear bushings are similar in that one end consists of a plate on the outside, a slight gap, some rubber (actually part of the inner absorber material) connected to a flange. The flange is...
  2. Suspension, Axles, Brakes
    ​Just curious if anyone here has ever attempted this on a 1st gen Tundra = https://www.youtube.com/watch?v=vkVLBOnAifc I have found several videos and comments on the net of people doing this on Tacomas but I can't find anything on whether or not it's possible on a 2006 Tundra. I'm sure it's...
  3. T-Case, Driveshaft, Diff, Axle, Hub
    Hi TS! I ordered a Kazuma LSD the other day and it should be arriving soon.:D I think i have a general idea about how to install it and im gonna have a buddy who is better at that stuff than i am help me out too. Is there any tricks or tips that you guys have to share with me? Anything that gave...
  4. 1Gen-Sequoia
    Hi everybody, to be short on my story what im trying to do is to upgrade my SR5 to the factory fog lights system. I followed the instructions of another member to make this the closest to factory installed fog lights.... So I got these items:81220-0C020 Sequoia Limited Fog Lamp Assy - Driver...
  5. 1Gen-Member Mods, Build Threads, Write-ups
    I found two sets of headers for a 2000-2004 tundra for $100 a pair that someone is trying to get rid of. They are brand new and haven't been used.. I know install is difficult, so how much should it cost me to get a shop to do it? Is this even a good idea? If I buy both sets would anyone be...
  6. Performance Intake & Exhaust Systems
    Hey guys... I just ordered the TRD Dual Cat-back Exhaust (PTR03-34101, PTR03-34106) and should be getting it delivered by next week. I wanted to see if anyone out there had installed the system themself and whether or not its a good idea to try to do it at home? The instructions look simple...
  7. 1Gen-Sequoia
    Hello all, Was wondering if anyone in the DC/Maryland/Virgina area knew of any places that install lift kits? (excluding trick trucks) Thanks
  8. 2Gen-Tundra
    Does anyone know if the 2013 Nav unit has the same pinout as previous models? I am following a 2007 install manual and I just want to make sure it will work. I am having a hard time getting turn by turn directions to work and the backup camera. I have the reverse signal wire connected properly...
  9. 1Gen-Member Mods, Build Threads, Write-ups
    My snorkel Install (I take no responsibility for problems that can arise from This Install. Do at your own risk) Do you want a continuous install write up or do you guys want it all at once? Ordered an ARB Snorkel system for the Landcruiser 100 series and an AFE Pro-Dry S Air Filter. If...
  10. Electrical & Computer Systems
    My truck is an 06 SR5. I bought an ebay HID Bi-Xenon 8000K kit. It's the dual beam H4. I had a few spare minutes, so I installed the kit on the passenger side just to see what it looks like. I unplugged the headlight socket from the stock bulb and plugged in the bulb/ballast setup. I turned on...
  11. 2Gen-Tundra
    I want to add the backup camera and monitor to my 2010 crewmax (no navigation). For the camera, I want to use the OEM camera that built into the tailgate handle. For the monitor, I want to use the origial OEM monitor (not the flip down one) When I put the tailgate down, I can see the...
  12. 2Gen-Tundra
    Does anyone have photos of how they installed their road armor front bumper? Not just a final photo but photos as you went along installing the bumper including what stock parts had to be removed? Thanks for the help
  13. 2Gen-Tundra
    Hey please help anyone who knows!! I have a single cab 2007 tundra and it doesnt have and back speaker well I got some 6x9's and boxs for them I just need to know how to wire them so that the fade on the stereo works. I have looked up behind the pedals and there is no way to get to the back of...
  14. Audio & Stereo
    I know that the door speakers are 6 3/4 but has anyone been able to install size 6 1/2 with no problems. I just want to know because there are more 6 1/2 speakers out there than 6 3/4. Thaanks.
  15. 1Gen-Tundra
    I finished this install last June '09. Finally got around to posting the pics. Many of the installation ideas I got from right here. Thanks for all the great tips and hopefully I added a few more. It took about 2 1/2 months to complete everything working on weekends when I could. I bought all...
  16. 1Gen-Tundra
    2006 Double Cab w/o JBL - I am planning on installing a new head unit in my truck. Currently I have the stock AM/FM single CD unit. My goal is to get one with iPod connectivity. Sounds simple, but I want a clean look...So...my plan is to get a unit with iPod connection in the back of the...
  17. Audio & Stereo
    Installed the DNX5140 tonight. Easier than I thought... I do appreciate the wealth of knowledge I was able to draw from this forum. Metra Dash kit looks like its straight from the factory! Parking Sensor Mod worked for the 5140 just like it did for the 5120s... I was worried it wouldn't...
  18. 2Gen-Tundra
    I am looking for a how to source to help me install a couple of LEDs. I do not want to replace Lights with LEDs. I want to install LEDs in places that do not have lights. I also need a basic how to guid on auto wiring and what tools to use and what I need (for example how to find a specific...
  19. Audio & Stereo
    I need to install a double DIN 05 Scion HU in my 06 Tundra Access Cab with factory cd/cassette radio. My problem is different than CyberBilly's. He had an amp under his radio in dash. I found mine under jump seat in back. The Scion Pioneer radio sports the standard Toyota 10 and 6 pin plug...
Top