Toyota Tundra Forums banner

leveling

  1. 2008 Tundra CrewMax 10in Lift but rear end sags Help!

    Suspension & Axle
    I bought a 2008 Tundra Crewmax this past summer and put a 7in BDS lift under it with a 3in body lift. I went with Fox coilovers in the front and the Fox 2.0 in the rear. Love the truck and love the lift but this rear end sagging issue has got to be dealt with. Its weird because when I measure...
  2. Just got 14' Tundra DC - Info on L.A. CA Bilstein 5100 installers

    Suspension & Axle
    Hello All, I just traded in my 04' Sequoia and picked up a 14' Tundra SR5 Double Cab. Looking to level truck out and get a small over all lift. Planned on running 33's after the Leveling and I'll be a Mall Crawler...99% on pavement with an occasional need to drive on tame dirt ranches. Ive...
  3. 2nd Gen Tundra : TRD wheels with BFG TA KO's 275/70/18?? ANYONE with pics?

    Tundra
    I am looking for pics of stock and or leveled Tundras with the standard TRD wheels with BFG's - 275/70/18's. Currently have 'bike tires.." 255 70/18 and I think look ridiculous on these trucks! Im really trying to decide what level on kit for the front end as well as wheel spacers as well...I...
  4. 5100s, spacers and terra grapplers for beefier stock look on CM TRD

    Tundra
    I have a 2010 2wd CM TRD. The truck primarily sees city and highway miles with some light beach and field duty. My goal is to give the truck a beefier look and my current strategy is to put 5100s up front only, 1.5 hub centric spacers all around, and replace stock 275s with 285/65/18 Terra...
  5. Stock bilstein shocks on 2012 Tundra TRD

    Tundra
    Does anyone know if the stock 2012 TRD shocks are adjustable or do I need the 5100's to be able to do that. I added the 3" coil spacer but feel its still not really level. I'm looking to get an extra inch or so in the front.. Any ideas???
  6. Installing leveling kit today***pics inside***

    1Gen-Tundra
    "ALL THE PICTURES FROM THE THREAD ARE IN THIS FIRST POST" for all you lazies who do not want to read I decided to take some pictures before i installed the leveling kit tonight. The truck will be getting the rear lowered, via drop shackle. I cant wait for the truck to sit level Here are some...
  7. 2011 level kit, do i need the diff drop

    Tundra
    Hey everyone. First time here. Bought a new crewmax 4x4 sr5, super white. Slowly making it my own. Many questions here have been answered. Thanks in advance. Heres my current request. I want to level the front of the truck. I dont do any off roading. Truck is basically a not so daily driver(fuel...
  8. 2nd gen bilstein 5100 work on 1st gen

    1Gen-Tundra
    Does anyone know if the bilstein 5100 adjustable up to 2.5" would work on a 2096 DC? Curious as I would really like to level/lift my truck and not sure how much I would get out of the 5100's for 1st gen with the 2" lift they can provide for the 1st gens except the DC. Trying to eliminate...
  9. 3" leveling kit + Diff.drop = Drive shaft stress?

    1Gen-Tundra
    Hi. No worries till today. My drive axel arm-boot leaking. since I did a 3" inch leveling kit.... seams like there's too much stress on the driveaxel arms. My Mech. is looking for longer arms and/or dropping the axel an inch or two. Have any one done this?
  10. 3" leveling kit + Diff.drop = Drive shaft stress?

    1Gen-Tundra
    Hey. I had no worries with my tundra till today. My Drive axel arm-boot leaking. since I did a 3" inch leveling kit.... seams like too much stress on the arms. My Mech. is looking for longer arms and/or dropping the axel an inch or two. Have any one done this? Any advise?
Top